Hello *, i'm not a device drivers developer, but i'm trying to learn something about the kernel.
I'm starting the adventure with this USB Thermometer: http://www.usbfever.com/index_eproduct_view.php?products_id=257 passing vendorid and productid to the ftdi_sio kernel module, I can attach the device to ttyUSB0, and i get this with dmesg: [95344.944000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device [95344.944000] ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected [95344.944000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/ftdi_sio.c: Detected FT8U232AM [95344.944000] usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB0 [95344.944000] usbcore: registered new interface driver ftdi_sio Now, what can I do to test the device? with "cat /dev/ttyUSB0" or with minicom (9600 8N1) i cannot get any output from the device regards, -- Davide Corio email: davide.corio<at>domsense.com web: http://www.domsense.com - To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
