According to ChipIdea's reference manual in section 8.5.2
"Non-streaming operational mode in device mode", we'd better enable stream
mode, especially that ISO endpoints are not supported when the SDIS bit
is set.
Signed-off-by: Neil Zhang <zhan...@marvell.com>
---
drivers/usb/gadget/mv_udc_core.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 425a204..4d3a413 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -1082,7 +1082,7 @@ static int udc_reset(struct mv_udc *udc)
tmp |= USBMODE_CTRL_MODE_DEVICE;
/* turn setup lockout off, require setup tripwire in usbcmd */
- tmp |= USBMODE_SETUP_LOCK_OFF | USBMODE_STREAM_DISABLE;
+ tmp |= USBMODE_SETUP_LOCK_OFF;
writel(tmp, &udc->op_regs->usbmode);
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
