From: Abhilash Kesavan <a.kesa...@samsung.com>

This patch retrieves and configures the vbus control gpio via
the device tree. The suspend/resume callbacks will be later
modified for vbus control.

Signed-off-by: Abhilash Kesavan <a.kesa...@samsung.com>
Signed-off-by: Vivek Gautam <gautam.vi...@samsung.com>

diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 52d0049..9f9870c 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -15,6 +15,7 @@
 #include <linux/clk.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/of_gpio.h>
 #include <plat/ehci.h>
 #include <plat/usb-phy.h>
 
@@ -64,6 +65,28 @@ static const struct hc_driver s5p_ehci_hc_driver = {
        .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
 };
 
+static int s5p_ehci_setup_gpio(struct platform_device *pdev)
+{
+       int err;
+       int gpio;
+
+       if (!pdev->dev.of_node)
+               return 0;
+
+       gpio = of_get_named_gpio(pdev->dev.of_node,
+                       "samsung,vbus-gpio", 0);
+       if (!gpio_is_valid(gpio))
+               return 0;
+
+       err = gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "ehci_vbus_gpio");
+       if (err) {
+               dev_err(&pdev->dev, "can't request ehci vbus gpio %d", gpio);
+               return err;
+       }
+
+       return err;
+}
+
 static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32);
 
 static int __devinit s5p_ehci_probe(struct platform_device *pdev)
@@ -92,6 +115,8 @@ static int __devinit s5p_ehci_probe(struct platform_device 
*pdev)
        if (!pdev->dev.coherent_dma_mask)
                pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
+       s5p_ehci_setup_gpio(pdev);
+
        s5p_ehci = kzalloc(sizeof(struct s5p_ehci_hcd), GFP_KERNEL);
        if (!s5p_ehci)
                return -ENOMEM;
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to