AM33xx has two PHY of same type used by each musb controller so
use phandle of phy nodes to get the phy pointer.
Signed-off-by: Ajay Kumar Gupta <ajay.gu...@ti.com>
---
.../devicetree/bindings/usb/am33xx-usb.txt | 2 ++
drivers/usb/musb/musb_dsps.c | 4 +++-
2 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt
b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
index 9782585..e2702df 100644
--- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
@@ -12,6 +12,8 @@ AM33XX MUSB GLUE
represents PERIPHERAL.
- power : Should be "250". This signifies the controller can supply upto
500mA when operating in host mode.
+ - usb0-phy : phandle for usb0 NOP PHY
+ - usb1-phy : phandle for usb1 NOP PHY
NOP USB PHY
- compatible : Should be "nop-xceiv-usb"
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 78c88fd..ab6b74c 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -419,6 +419,7 @@ static int dsps_musb_init(struct musb *musb)
struct dsps_glue *glue = platform_get_drvdata(pdev);
const struct dsps_musb_wrapper *wrp = glue->wrp;
void __iomem *reg_base = musb->ctrl_base;
+ char name[10];
u32 rev, val;
int status;
@@ -426,7 +427,8 @@ static int dsps_musb_init(struct musb *musb)
musb->mregs += wrp->musb_core_offset;
/* Get the NOP PHY */
- musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+ sprintf(name, "usb%d-phy", musb->id);
+ musb->xceiv = devm_usb_get_phy_by_phandle(&pdev->dev, name);
if (IS_ERR_OR_NULL(musb->xceiv))
return -ENODEV;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
