From: Hans de Goede <hdego...@redhat.com> Add a driver for the Pericom PI3USB30532 Type-C cross switch / mux chip found on some devices with a Type-C port.
Signed-off-by: Hans de Goede <hdego...@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevche...@gmail.com> Signed-off-by: Heikki Krogerus <heikki.kroge...@linux.intel.com> --- Changes in v7: - Remove unneeded semicolon Changes in v4: -Add Andy's Reviewed-by Changes in v2: -Cleanup pi3usb30532_set_conf() error handling -Add Heikki's Reviewed-by Changes in v1: -This is a rewrite of my previous driver which was using the drivers/mux framework to use the new drivers/usb/typec/mux framework --- MAINTAINERS | 6 ++ drivers/usb/typec/Kconfig | 2 + drivers/usb/typec/Makefile | 1 + drivers/usb/typec/mux/Kconfig | 10 ++ drivers/usb/typec/mux/Makefile | 3 + drivers/usb/typec/mux/pi3usb30532.c | 178 ++++++++++++++++++++++++++++++++++++ 6 files changed, 200 insertions(+) create mode 100644 drivers/usb/typec/mux/Kconfig create mode 100644 drivers/usb/typec/mux/Makefile create mode 100644 drivers/usb/typec/mux/pi3usb30532.c diff --git a/MAINTAINERS b/MAINTAINERS index 5f1988cddbe8..17b64236719f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14521,6 +14521,12 @@ F: drivers/usb/ F: include/linux/usb.h F: include/linux/usb/ +USB TYPEC PI3USB30532 MUX DRIVER +M: Hans de Goede <hdego...@redhat.com> +L: linux-usb@vger.kernel.org +S: Maintained +F: drivers/usb/typec/mux/pi3usb30532.c + USB TYPEC SUBSYSTEM M: Heikki Krogerus <heikki.kroge...@linux.intel.com> L: linux-usb@vger.kernel.org diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig index a2a0684e7c82..030f88cb0c3f 100644 --- a/drivers/usb/typec/Kconfig +++ b/drivers/usb/typec/Kconfig @@ -85,4 +85,6 @@ config TYPEC_TPS6598X If you choose to build this driver as a dynamically linked module, the module will be called tps6598x.ko. +source "drivers/usb/typec/mux/Kconfig" + endif # TYPEC diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile index 56b2e9516ec1..1f599a6c30cc 100644 --- a/drivers/usb/typec/Makefile +++ b/drivers/usb/typec/Makefile @@ -6,3 +6,4 @@ obj-y += fusb302/ obj-$(CONFIG_TYPEC_WCOVE) += typec_wcove.o obj-$(CONFIG_TYPEC_UCSI) += ucsi/ obj-$(CONFIG_TYPEC_TPS6598X) += tps6598x.o +obj-$(CONFIG_TYPEC) += mux/ diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig new file mode 100644 index 000000000000..9a954d2b8d8f --- /dev/null +++ b/drivers/usb/typec/mux/Kconfig @@ -0,0 +1,10 @@ +menu "USB Type-C Multiplexer/DeMultiplexer Switch support" + +config TYPEC_MUX_PI3USB30532 + tristate "Pericom PI3USB30532 Type-C cross switch driver" + depends on I2C + help + Say Y or M if your system has a Pericom PI3USB30532 Type-C cross + switch / mux chip found on some devices with a Type-C port. + +endmenu diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile new file mode 100644 index 000000000000..1332e469b8a0 --- /dev/null +++ b/drivers/usb/typec/mux/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o diff --git a/drivers/usb/typec/mux/pi3usb30532.c b/drivers/usb/typec/mux/pi3usb30532.c new file mode 100644 index 000000000000..b0e88db60ecf --- /dev/null +++ b/drivers/usb/typec/mux/pi3usb30532.c @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Pericom PI3USB30532 Type-C cross switch / mux driver + * + * Copyright (c) 2017-2018 Hans de Goede <hdego...@redhat.com> + */ + +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/usb/tcpm.h> +#include <linux/usb/typec_mux.h> + +#define PI3USB30532_CONF 0x00 + +#define PI3USB30532_CONF_OPEN 0x00 +#define PI3USB30532_CONF_SWAP 0x01 +#define PI3USB30532_CONF_4LANE_DP 0x02 +#define PI3USB30532_CONF_USB3 0x04 +#define PI3USB30532_CONF_USB3_AND_2LANE_DP 0x06 + +struct pi3usb30532 { + struct i2c_client *client; + struct mutex lock; /* protects the cached conf register */ + struct typec_switch sw; + struct typec_mux mux; + u8 conf; +}; + +static int pi3usb30532_set_conf(struct pi3usb30532 *pi, u8 new_conf) +{ + int ret = 0; + + if (pi->conf == new_conf) + return 0; + + ret = i2c_smbus_write_byte_data(pi->client, PI3USB30532_CONF, new_conf); + if (ret) { + dev_err(&pi->client->dev, "Error writing conf: %d\n", ret); + return ret; + } + + pi->conf = new_conf; + return 0; +} + +static int pi3usb30532_sw_set(struct typec_switch *sw, + enum typec_orientation orientation) +{ + struct pi3usb30532 *pi = container_of(sw, struct pi3usb30532, sw); + u8 new_conf; + int ret; + + mutex_lock(&pi->lock); + new_conf = pi->conf; + + switch (orientation) { + case TYPEC_ORIENTATION_NONE: + new_conf = PI3USB30532_CONF_OPEN; + break; + case TYPEC_ORIENTATION_NORMAL: + new_conf &= ~PI3USB30532_CONF_SWAP; + break; + case TYPEC_ORIENTATION_REVERSE: + new_conf |= PI3USB30532_CONF_SWAP; + break; + } + + ret = pi3usb30532_set_conf(pi, new_conf); + mutex_unlock(&pi->lock); + + return ret; +} + +static int pi3usb30532_mux_set(struct typec_mux *mux, int state) +{ + struct pi3usb30532 *pi = container_of(mux, struct pi3usb30532, mux); + u8 new_conf; + int ret; + + mutex_lock(&pi->lock); + new_conf = pi->conf; + + switch (state) { + case TYPEC_MUX_NONE: + new_conf = PI3USB30532_CONF_OPEN; + break; + case TYPEC_MUX_USB: + new_conf = (new_conf & PI3USB30532_CONF_SWAP) | + PI3USB30532_CONF_USB3; + break; + case TYPEC_MUX_DP: + new_conf = (new_conf & PI3USB30532_CONF_SWAP) | + PI3USB30532_CONF_4LANE_DP; + break; + case TYPEC_MUX_DOCK: + new_conf = (new_conf & PI3USB30532_CONF_SWAP) | + PI3USB30532_CONF_USB3_AND_2LANE_DP; + break; + } + + ret = pi3usb30532_set_conf(pi, new_conf); + mutex_unlock(&pi->lock); + + return ret; +} + +static int pi3usb30532_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct pi3usb30532 *pi; + int ret; + + pi = devm_kzalloc(dev, sizeof(*pi), GFP_KERNEL); + if (!pi) + return -ENOMEM; + + pi->client = client; + pi->sw.dev = dev; + pi->sw.set = pi3usb30532_sw_set; + pi->mux.dev = dev; + pi->mux.set = pi3usb30532_mux_set; + mutex_init(&pi->lock); + + ret = i2c_smbus_read_byte_data(client, PI3USB30532_CONF); + if (ret < 0) { + dev_err(dev, "Error reading config register %d\n", ret); + return ret; + } + pi->conf = ret; + + ret = typec_switch_register(&pi->sw); + if (ret) { + dev_err(dev, "Error registering typec switch: %d\n", ret); + return ret; + } + + ret = typec_mux_register(&pi->mux); + if (ret) { + typec_switch_unregister(&pi->sw); + dev_err(dev, "Error registering typec mux: %d\n", ret); + return ret; + } + + i2c_set_clientdata(client, pi); + return 0; +} + +static int pi3usb30532_remove(struct i2c_client *client) +{ + struct pi3usb30532 *pi = i2c_get_clientdata(client); + + typec_mux_unregister(&pi->mux); + typec_switch_unregister(&pi->sw); + return 0; +} + +static const struct i2c_device_id pi3usb30532_table[] = { + { "pi3usb30532" }, + { } +}; +MODULE_DEVICE_TABLE(i2c, pi3usb30532_table); + +static struct i2c_driver pi3usb30532_driver = { + .driver = { + .name = "pi3usb30532", + }, + .probe_new = pi3usb30532_probe, + .remove = pi3usb30532_remove, + .id_table = pi3usb30532_table, +}; + +module_i2c_driver(pi3usb30532_driver); + +MODULE_AUTHOR("Hans de Goede <hdego...@redhat.com>"); +MODULE_DESCRIPTION("Pericom PI3USB30532 Type-C mux driver"); +MODULE_LICENSE("GPL"); -- 2.16.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html