Since max_snk_* is to be deprecated, so remove max_snk_* by adding a variable PDO for sink config.
Signed-off-by: Li Jun <jun...@nxp.com> --- drivers/usb/typec/fusb302/fusb302.c | 51 +++++++++++++++++++++++++++---------- 1 file changed, 37 insertions(+), 14 deletions(-) diff --git a/drivers/usb/typec/fusb302/fusb302.c b/drivers/usb/typec/fusb302/fusb302.c index 7036171..db4d9cd 100644 --- a/drivers/usb/typec/fusb302/fusb302.c +++ b/drivers/usb/typec/fusb302/fusb302.c @@ -120,6 +120,7 @@ struct fusb302_chip { enum typec_cc_polarity cc_polarity; enum typec_cc_status cc1; enum typec_cc_status cc2; + u32 snk_pdo[PDO_MAX_OBJECTS]; #ifdef CONFIG_DEBUG_FS struct dentry *dentry; @@ -1212,11 +1213,6 @@ static const u32 snk_pdo[] = { static const struct tcpc_config fusb302_tcpc_config = { .src_pdo = src_pdo, .nr_src_pdo = ARRAY_SIZE(src_pdo), - .snk_pdo = snk_pdo, - .nr_snk_pdo = ARRAY_SIZE(snk_pdo), - .max_snk_mv = 5000, - .max_snk_ma = 3000, - .max_snk_mw = 15000, .operating_snk_mw = 2500, .type = TYPEC_PORT_DRP, .data = TYPEC_PORT_DRD, @@ -1756,6 +1752,38 @@ static int init_gpio(struct fusb302_chip *chip) return 0; } +static int fusb302_composite_snk_pdo_array(struct fusb302_chip *chip) +{ + struct device *dev = chip->dev; + u32 mv, ma, mw, min_mv; + unsigned int i; + + /* Copy the static snk pdo */ + for (i = 0; i < ARRAY_SIZE(snk_pdo); i++) + chip->snk_pdo[i] = snk_pdo[i]; + + if (device_property_read_u32(dev, "fcs,max-sink-microvolt", &mv) || + device_property_read_u32(dev, "fcs,max-sink-microamp", &ma) || + device_property_read_u32(dev, "fcs,max-sink-microwatt", &mw)) + return i; + + mv = mv / 1000; + ma = ma / 1000; + mw = mw / 1000; + + min_mv = 1000 * chip->tcpc_config.operating_snk_mw / ma; + if (pdo_type(snk_pdo[i-1] == PDO_TYPE_FIXED)) + min_mv = max(min_mv, pdo_fixed_voltage(snk_pdo[i-1])); + else + min_mv = max(min_mv, pdo_max_voltage(snk_pdo[i-1])); + ma = min(ma, 1000 * mw / min_mv); + + /* Insert the new pdo to the end */ + chip->snk_pdo[i] = PDO_VAR(min_mv, mv, ma); + + return i+1; +} + static int fusb302_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1784,18 +1812,13 @@ static int fusb302_probe(struct i2c_client *client, chip->tcpc_dev.config = &chip->tcpc_config; mutex_init(&chip->lock); - if (!device_property_read_u32(dev, "fcs,max-sink-microvolt", &v)) - chip->tcpc_config.max_snk_mv = v / 1000; - - if (!device_property_read_u32(dev, "fcs,max-sink-microamp", &v)) - chip->tcpc_config.max_snk_ma = v / 1000; - - if (!device_property_read_u32(dev, "fcs,max-sink-microwatt", &v)) - chip->tcpc_config.max_snk_mw = v / 1000; - if (!device_property_read_u32(dev, "fcs,operating-sink-microwatt", &v)) chip->tcpc_config.operating_snk_mw = v / 1000; + /* Composite sink PDO */ + chip->tcpc_config.nr_snk_pdo = fusb302_composite_snk_pdo_array(chip); + chip->tcpc_config.snk_pdo = chip->snk_pdo; + /* * Devicetree platforms should get extcon via phandle (not yet * supported). On ACPI platforms, we get the name from a device prop. -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html