On Tue, 20 Feb 2018 15:29:28 +0200, Mathias Nyman wrote: > On 16.02.2018 15:28, Michael Tretter wrote: > > On Mon, 29 Jan 2018 14:02:57 +0200, Mathias Nyman wrote: > >> On 19.01.2018 22:12, Philipp Zabel wrote: > >>> On Fri, Jan 19, 2018 at 2:10 PM, Michael Tretter > >>> <m.tret...@pengutronix.de> wrote: > >>>> I found the old thread and it sounds exactly like my issue. Different > >>>> camera, but same xHCI controller. > >>> > >>> I have exactly the same issue with the xHCI controller of my laptop and > >>> "Oculus Sensor" USB3 isochronous mostly-UVC cameras: > >>> > >>> 00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI > >>> Controller (rev 03) (prog-if 30 [XHCI]) > >>> Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller > >>> Flags: bus master, medium devsel, latency 0, IRQ 44 > >>> Memory at f2220000 (64-bit, non-prefetchable) [size=64K] > >>> Capabilities: [70] Power Management version 2 > >>> Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+ > >>> Kernel driver in use: xhci_hcd > >>> Kernel modules: xhci_pci > >>> > >>> T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 > >>> D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 > >>> P: Vendor=2833 ProdID=0211 Rev= 0.00 > >>> S: Manufacturer=Oculus VR > >>> S: Product=Rift Sensor > >>> S: SerialNumber=WMTD3034300BCT > >>> C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=800mA > >>> A: FirstIf#= 0 IfCount= 2 Cls=ff(vend.) Sub=03 Prot=00 > >>> I:* If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=01 Prot=00 Driver=uvcvideo > >>> E: Ad=83(I) Atr=03(Int.) MxPS= 32 Ivl=128ms > >>> I:* If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=02 Prot=00 Driver=uvcvideo > >>> I: If#= 1 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=00 Driver=uvcvideo > >>> E: Ad=81(I) Atr=05(Isoc) MxPS=1024 Ivl=125us > >>> I: If#= 1 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=00 Driver=uvcvideo > >>> E: Ad=81(I) Atr=05(Isoc) MxPS=1024 Ivl=125us > >>> > >>> Any USB2 or USB3 device that I plug in while the first camera is > >>> streaming in > >>> altsetting 1 or 2 causes the bandwidth error. The same happens when I try > >>> to > >>> change the altsetting on an isochronous endpoint of an already plugged > >>> device. > >>> While the camera is in altsetting 0, other devices can be probed and work. > >>> > >>>> For some tests, I changed the xhci_change_max_exit_latency() function > >>>> to ignore the requested MEL and set the MEL to 0. Now the USB devices > >>>> are detected correctly. > >>> > >>> Exactly the same thing helps here, as well. With this hack, streaming > >>> from two > >>> of those cameras at the same time works without any apparent problem: > >>> > >>> ----------8<---------- > >>> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c > >>> index 297536c9fd00..3cb4a60d8822 100644 > >>> --- a/drivers/usb/host/xhci.c > >>> +++ b/drivers/usb/host/xhci.c > >>> @@ -4025,7 +4025,7 @@ static int __maybe_unused > >>> xhci_change_max_exit_latency(struct xhci_hcd *xhci, > >>> ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); > >>> slot_ctx = xhci_get_slot_ctx(xhci, command->in_ctx); > >>> slot_ctx->dev_info2 &= cpu_to_le32(~((u32) MAX_EXIT)); > >>> - slot_ctx->dev_info2 |= cpu_to_le32(max_exit_latency); > >>> + slot_ctx->dev_info2 |= cpu_to_le32(0); > >>> slot_ctx->dev_state = 0; > >>> > >>> xhci_dbg_trace(xhci, trace_xhci_dbg_context_change, > >>> ---------->8---------- > >>> > >> > >> Ok, back after a week on sickleave. > >> I'm getting the magewell capture device and try to reproduce this myself. > > > > I don't think that the issue is specific to the magewell capture > > device, but rather should be reproducible with any USB3 device with > > isochronous endpoints. > > > > Anyway, please tell me, if I can somehow help you to get this properly > > fixed. > > I'm currently looking at device reset issues after suspend, but this is on the > todo list. > > I got a magewell device, (haven't unboxed it yet) > Maybe step by step instructions to reproduce it could speed things up.
Did you have time to unbox and test the Magewell device? Michael -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html