TCPCI stands for typec port controller interface, its implementation
has full typec port control with power delivery support, it's a
standard i2c slave with GPIO input as irq interface, detail see spec
"Universal Serial Bus Type-C Port Controller Interface Specification
Revision 1.0, Version 1.1"

Reviewed-by: Rob Herring <r...@kernel.org>
Signed-off-by: Li Jun <jun...@nxp.com>
---
 .../devicetree/bindings/usb/typec-tcpci.txt        | 49 ++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/typec-tcpci.txt 
b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
new file mode 100644
index 0000000..0dd1469
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/typec-tcpci.txt
@@ -0,0 +1,49 @@
+TCPCI(Typec port cotroller interface) binding
+---------------------------------------------
+
+Required properties:
+- compatible:       should be set one of following:
+                   - "nxp,ptn5110" for NXP USB PD TCPC PHY IC ptn5110.
+
+- reg:              the i2c slave address of typec port controller device.
+- interrupt-parent: the phandle to the interrupt controller which provides
+                    the interrupt.
+- interrupts:       interrupt specification for tcpci alert.
+
+Required sub-node:
+- connector: The "usb-c-connector" attached to the tcpci chip, the bindings
+  of connector node are specified in
+  Documentation/devicetree/bindings/connector/usb-connector.txt
+
+Example:
+
+ptn5110@50 {
+       compatible = "nxp,ptn5110";
+       reg = <0x50>;
+       interrupt-parent = <&gpio3>;
+       interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+       usb_con: connector {
+               compatible = "usb-c-connector";
+               label = "USB-C";
+               data-role = "dual";
+               power-role = "dual";
+               try-power-role = "sink";
+               source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+               sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
+                            PDO_VAR(5000, 12000, 2000)>;
+               op-sink-microwatt = <10000000>;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@1 {
+                               reg = <1>;
+                               usb_con_ss: endpoint {
+                                       remote-endpoint = <&usb3_data_ss>;
+                               };
+                       };
+               };
+       };
+};
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to