In order to let host's parent device, rtsx_usb, to use USB remote wake
up signaling to do card detection, it needs to be suspended. Hence it's
necessary to add runtime PM support for the memstick host.
To keep memstick host stays suspended when it's not in use, convert the
card detection function from kthread to delayed_work, which can be
scheduled when the host is resumed and can be canceled when the host is
suspended.
Use an idle function check if there's no card and the power mode is
MEMSTICK_POWER_OFF. If both criteria are met, put the device to suspend.
Signed-off-by: Kai-Heng Feng <kai.heng.f...@canonical.com>
---
drivers/memstick/host/rtsx_usb_ms.c | 138 ++++++++++++++--------------
1 file changed, 71 insertions(+), 67 deletions(-)
diff --git a/drivers/memstick/host/rtsx_usb_ms.c
b/drivers/memstick/host/rtsx_usb_ms.c
index cd12f3d1c088..126eb310980a 100644
--- a/drivers/memstick/host/rtsx_usb_ms.c
+++ b/drivers/memstick/host/rtsx_usb_ms.c
@@ -40,15 +40,14 @@ struct rtsx_usb_ms {
struct mutex host_mutex;
struct work_struct handle_req;
-
- struct task_struct *detect_ms;
- struct completion detect_ms_exit;
+ struct delayed_work poll_card;
u8 ssc_depth;
unsigned int clock;
int power_mode;
unsigned char ifmode;
bool eject;
+ bool suspend;
};
static inline struct device *ms_dev(struct rtsx_usb_ms *host)
@@ -524,7 +523,7 @@ static void rtsx_usb_ms_handle_req(struct work_struct *work)
int rc;
if (!host->req) {
- pm_runtime_get_sync(ms_dev(host));
+ pm_runtime_get_noresume(ms_dev(host));
do {
rc = memstick_next_req(msh, &host->req);
dev_dbg(ms_dev(host), "next req %d\n", rc);
@@ -545,7 +544,7 @@ static void rtsx_usb_ms_handle_req(struct work_struct *work)
host->req->error);
}
} while (!rc);
- pm_runtime_put(ms_dev(host));
+ pm_runtime_put_noidle(ms_dev(host));
}
}
@@ -572,7 +571,7 @@ static int rtsx_usb_ms_set_param(struct memstick_host *msh,
dev_dbg(ms_dev(host), "%s: param = %d, value = %d\n",
__func__, param, value);
- pm_runtime_get_sync(ms_dev(host));
+ pm_runtime_get_noresume(ms_dev(host));
mutex_lock(&ucr->dev_mutex);
err = rtsx_usb_card_exclusive_check(ucr, RTSX_USB_MS_CARD);
@@ -585,14 +584,14 @@ static int rtsx_usb_ms_set_param(struct memstick_host
*msh,
break;
if (value == MEMSTICK_POWER_ON) {
- pm_runtime_get_sync(ms_dev(host));
+ pm_runtime_get_noresume(ms_dev(host));
err = ms_power_on(host);
+ if (err)
+ pm_runtime_put_noidle(ms_dev(host));
} else if (value == MEMSTICK_POWER_OFF) {
err = ms_power_off(host);
- if (host->msh->card)
+ if (!err)
pm_runtime_put_noidle(ms_dev(host));
- else
- pm_runtime_put(ms_dev(host));
} else
err = -EINVAL;
if (!err)
@@ -638,7 +637,7 @@ static int rtsx_usb_ms_set_param(struct memstick_host *msh,
}
out:
mutex_unlock(&ucr->dev_mutex);
- pm_runtime_put(ms_dev(host));
+ pm_runtime_put_noidle(ms_dev(host));
/* power-on delay */
if (param == MEMSTICK_POWER && value == MEMSTICK_POWER_ON)
@@ -648,75 +647,86 @@ static int rtsx_usb_ms_set_param(struct memstick_host
*msh,
return err;
}
-#ifdef CONFIG_PM_SLEEP
-static int rtsx_usb_ms_suspend(struct device *dev)
+#ifdef CONFIG_PM
+static int rtsx_usb_ms_runtime_suspend(struct device *dev)
{
struct rtsx_usb_ms *host = dev_get_drvdata(dev);
struct memstick_host *msh = host->msh;
- dev_dbg(ms_dev(host), "--> %s\n", __func__);
-
+ host->suspend = true;
memstick_suspend_host(msh);
+
return 0;
}
-static int rtsx_usb_ms_resume(struct device *dev)
+static int rtsx_usb_ms_runtime_resume(struct device *dev)
{
struct rtsx_usb_ms *host = dev_get_drvdata(dev);
struct memstick_host *msh = host->msh;
- dev_dbg(ms_dev(host), "--> %s\n", __func__);
-
memstick_resume_host(msh);
+ host->suspend = false;
+ schedule_delayed_work(&host->poll_card, 100);
+
return 0;
}
-#endif /* CONFIG_PM_SLEEP */
-/*
- * Thread function of ms card slot detection. The thread starts right after
- * successful host addition. It stops while the driver removal function sets
- * host->eject true.
- */
-static int rtsx_usb_detect_ms_card(void *__host)
+static int rtsx_usb_ms_runtime_idle(struct device *dev)
+{
+ struct rtsx_usb_ms *host = dev_get_drvdata(dev);
+
+ if (!host->msh->card && host->power_mode == MEMSTICK_POWER_OFF) {
+ pm_schedule_suspend(dev, 0);
+ return 0;
+ }
+
+ return -EAGAIN;
+}
+
+static UNIVERSAL_DEV_PM_OPS(rtsx_usb_ms_pm_ops,
+ rtsx_usb_ms_runtime_suspend, rtsx_usb_ms_runtime_resume,
+ rtsx_usb_ms_runtime_idle);
+#endif /* CONFIG_PM */
+
+static void rtsx_usb_ms_poll_card(struct work_struct *work)
{
- struct rtsx_usb_ms *host = (struct rtsx_usb_ms *)__host;
+ struct rtsx_usb_ms *host = container_of(work, struct rtsx_usb_ms,
+ poll_card.work);
struct rtsx_ucr *ucr = host->ucr;
- u8 val = 0;
int err;
+ u8 val;
- for (;;) {
- pm_runtime_get_sync(ms_dev(host));
- mutex_lock(&ucr->dev_mutex);
+ if (host->eject || host->suspend)
+ return;
- /* Check pending MS card changes */
- err = rtsx_usb_read_register(ucr, CARD_INT_PEND, &val);
- if (err) {
- mutex_unlock(&ucr->dev_mutex);
- goto poll_again;
- }
-
- /* Clear the pending */
- rtsx_usb_write_register(ucr, CARD_INT_PEND,
- XD_INT | MS_INT | SD_INT,
- XD_INT | MS_INT | SD_INT);
+ pm_runtime_get_noresume(ms_dev(host));
+ mutex_lock(&ucr->dev_mutex);
+ /* Check pending MS card changes */
+ err = rtsx_usb_read_register(ucr, CARD_INT_PEND, &val);
+ if (err) {
mutex_unlock(&ucr->dev_mutex);
+ goto poll_again;
+ }
- if (val & MS_INT) {
- dev_dbg(ms_dev(host), "MS slot change detected\n");
- memstick_detect_change(host->msh);
- }
+ /* Clear the pending */
+ rtsx_usb_write_register(ucr, CARD_INT_PEND,
+ XD_INT | MS_INT | SD_INT,
+ XD_INT | MS_INT | SD_INT);
-poll_again:
- pm_runtime_put(ms_dev(host));
- if (host->eject)
- break;
+ mutex_unlock(&ucr->dev_mutex);
+ pm_runtime_put_noidle(ms_dev(host));
- schedule_timeout_idle(HZ);
+ if (val & MS_INT) {
+ dev_dbg(ms_dev(host), "MS slot change detected\n");
+ memstick_detect_change(host->msh);
}
- complete(&host->detect_ms_exit);
- return 0;
+ pm_runtime_idle(ms_dev(host));
+
+poll_again:
+ if (!host->eject && !host->suspend)
+ schedule_delayed_work(&host->poll_card, 100);
}
static int rtsx_usb_ms_drv_probe(struct platform_device *pdev)
@@ -747,26 +757,21 @@ static int rtsx_usb_ms_drv_probe(struct platform_device
*pdev)
mutex_init(&host->host_mutex);
INIT_WORK(&host->handle_req, rtsx_usb_ms_handle_req);
- init_completion(&host->detect_ms_exit);
- host->detect_ms = kthread_create(rtsx_usb_detect_ms_card, host,
- "rtsx_usb_ms_%d", pdev->id);
- if (IS_ERR(host->detect_ms)) {
- dev_dbg(&(pdev->dev),
- "Unable to create polling thread.\n");
- err = PTR_ERR(host->detect_ms);
- goto err_out;
- }
+ INIT_DELAYED_WORK(&host->poll_card, rtsx_usb_ms_poll_card);
msh->request = rtsx_usb_ms_request;
msh->set_param = rtsx_usb_ms_set_param;
msh->caps = MEMSTICK_CAP_PAR4;
- pm_runtime_enable(&pdev->dev);
+ pm_runtime_set_active(ms_dev(host));
+ pm_runtime_enable(ms_dev(host));
+
err = memstick_add_host(msh);
if (err)
goto err_out;
- wake_up_process(host->detect_ms);
+ schedule_delayed_work(&host->poll_card, 100);
+
return 0;
err_out:
memstick_free_host(msh);
@@ -782,6 +787,7 @@ static int rtsx_usb_ms_drv_remove(struct platform_device
*pdev)
msh = host->msh;
host->eject = true;
cancel_work_sync(&host->handle_req);
+ cancel_delayed_work_sync(&host->poll_card);
mutex_lock(&host->host_mutex);
if (host->req) {
@@ -797,7 +803,6 @@ static int rtsx_usb_ms_drv_remove(struct platform_device
*pdev)
}
mutex_unlock(&host->host_mutex);
- wait_for_completion(&host->detect_ms_exit);
memstick_remove_host(msh);
memstick_free_host(msh);
@@ -816,9 +821,6 @@ static int rtsx_usb_ms_drv_remove(struct platform_device
*pdev)
return 0;
}
-static SIMPLE_DEV_PM_OPS(rtsx_usb_ms_pm_ops,
- rtsx_usb_ms_suspend, rtsx_usb_ms_resume);
-
static struct platform_device_id rtsx_usb_ms_ids[] = {
{
.name = "rtsx_usb_ms",
@@ -834,7 +836,9 @@ static struct platform_driver rtsx_usb_ms_driver = {
.id_table = rtsx_usb_ms_ids,
.driver = {
.name = "rtsx_usb_ms",
+#ifdef CONFIG_PM
.pm = &rtsx_usb_ms_pm_ops,
+#endif
},
};
module_platform_driver(rtsx_usb_ms_driver);
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
