On 7/26/2018 2:59 PM, Thinh Nguyen wrote: > On 7/26/2018 2:32 PM, Andy Shevchenko wrote: >> On Thu, Jul 26, 2018 at 11:52 PM, Thinh Nguyen >> <thinh.ngu...@synopsys.com> wrote: >>> dwc_usb31 does not support OTG mode. If the controller supports DRD but >>> the dr_mode is not specified or set to OTG, then set the mode to >>> peripheral. >>> >>> Signed-off-by: Thinh Nguyen <thi...@synopsys.com> >>> --- >>> drivers/usb/dwc3/core.c | 8 ++++++++ >>> 1 file changed, 8 insertions(+) >>> >>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c >>> index 21e4931d0cc0..64ba664d467c 100644 >>> --- a/drivers/usb/dwc3/core.c >>> +++ b/drivers/usb/dwc3/core.c >>> @@ -78,6 +78,14 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) >>> mode = USB_DR_MODE_HOST; >>> else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) >>> mode = USB_DR_MODE_PERIPHERAL; >>> + >>> + /* >>> + * dwc_usb31 does not support OTG mode. If the controller >>> + * supports DRD but the dr_mode is not specified or set to >>> OTG, >>> + * then set the mode to peripheral. >>> + */ >>> + if (mode == USB_DR_MODE_OTG && dwc3_is_usb31(dwc)) >> shouldn't be simple >> >> else if (dwc3_is_usb31(...)) >> >> ?
Actually, no. We want to set the mode to peripheral _only_ when dr_mode was not specified or set to OTG. Just checking for dwc3_is_usb31(...) is not enough. Thanks, Thinh -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
