Hi Anurag,

On 8/17/2018 5:25 AM, Anurag Kumar Vulisha wrote:
> Availability of TRB's are calculated using dwc3_calc_trbs_left(), which
> determines available TRB's based on the HWO bit set in a TRB.
>
> __dwc3_prepare_one_trb() is called with a TRB which needs to be prepared
> for transfer. This __dwc3_prepare_one_trb() calls dwc3_calc_trbs_left()
> to determine total available TRBs and set IOC bit if the total available
> TRBs are zero. Since the present working TRB(which is passed as an
> argument to __dwc3_prepare_one_trb() )  doesn't have HWO bit already set,
> there are chances where dwc3_calc_trbs_left() wrongly calculates this
> present working TRB as free(since the HWO bit is not yet set). This could
> be a problem. This patch correct this issue by setting HWO bit before
> calling dwc3_calc_trbs_left()
>
> Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vuli...@xilinx.com>
> ---
>  Changes in v2:
>       1. Changed the commit message
> ---
>  drivers/usb/dwc3/gadget.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 69bf137..f73d219 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -990,6 +990,8 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, 
> struct dwc3_trb *trb,
>                       trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
>       }
>  
> +     trb->ctrl |= DWC3_TRB_CTRL_HWO;
> +
>       if ((!no_interrupt && !chain) ||
>                       (dwc3_calc_trbs_left(dep) == 0))
>               trb->ctrl |= DWC3_TRB_CTRL_IOC;
> @@ -1000,8 +1002,6 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, 
> struct dwc3_trb *trb,
>       if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable)
>               trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(stream_id);
>  
> -     trb->ctrl |= DWC3_TRB_CTRL_HWO;
> -
>       trace_dwc3_prepare_trb(dep, trb);
>  }
>  
How do you reproduce this issue? We should not set HWO before setting
other trb->ctrl bits. Can you provide a driver tracepoint? If there's an
issue with the check if ((!no_interrupt && !chain) ||
dwc3_calc_trbs_left == 0), then we may need to fix the check there.

BR,
Thinh

Reply via email to