Availability of TRB's is calculated using dwc3_calc_trbs_left(), which
determines total available TRB's based on the HWO bit set in a TRB.

In the present code, __dwc3_prepare_one_trb() is called with a TRB which
needs to be prepared for transfer. This __dwc3_prepare_one_trb() calls
dwc3_calc_trbs_left() to determine total available TRBs and set IOC bit
if the total available TRBs are zero. Since the present working TRB (which
is passed as an argument to __dwc3_prepare_one_trb() )  doesn't yet have
the HWO bit set before calling dwc3_calc_trbs_left(), there are chances
that dwc3_calc_trbs_left() wrongly calculates this present working TRB
as free(since the HWO bit is not yet set) and returns the total available
TRBs as greater than zero (including the present working TRB). This could
be a problem.

This patch corrects the above mentioned problem in __dwc3_prepare_one_trb()
by increementing the dep->trb_enqueue at the last (after preparing the TRB)
instead of increementing at the start and setting the IOC bit only if the
total available TRBs returned by dwc3_calc_trbs_left() is 1 . Since we are
increementing the dep->trb_enqueue at the last, the present working TRB is
also considered as available by dwc3_calc_trbs_left() and non zero value is
returned . So, according to the modified logic, when the total available
TRBs is equal to 1 that means the total available TRBs in the pool are 0.

Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vuli...@xilinx.com>
Reviewed-by: Thinh Nguyen <thi...@synopsys.com>
---
 Changes in v5:
        1. None

 Changes in v4:
        1. Corrected the commit message as suggested by "Thinh Nguyen"

 Changes in v3:
        1. Corrected the logic for setting HWO bit as suggested by "Thinh 
Nguyen"

 Changes in v2:
        1. Changed the commit message
---
 drivers/usb/dwc3/gadget.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 032ea7d..8a1622b 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -911,8 +911,6 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, 
struct dwc3_trb *trb,
        struct usb_gadget       *gadget = &dwc->gadget;
        enum usb_device_speed   speed = gadget->speed;
 
-       dwc3_ep_inc_enq(dep);
-
        trb->size = DWC3_TRB_SIZE_LENGTH(length);
        trb->bpl = lower_32_bits(dma);
        trb->bph = upper_32_bits(dma);
@@ -991,7 +989,7 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, 
struct dwc3_trb *trb,
        }
 
        if ((!no_interrupt && !chain) ||
-                       (dwc3_calc_trbs_left(dep) == 0))
+                       (dwc3_calc_trbs_left(dep) == 1))
                trb->ctrl |= DWC3_TRB_CTRL_IOC;
 
        if (chain)
@@ -1002,6 +1000,8 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, 
struct dwc3_trb *trb,
 
        trb->ctrl |= DWC3_TRB_CTRL_HWO;
 
+       dwc3_ep_inc_enq(dep);
+
        trace_dwc3_prepare_trb(dep, trb);
 }
 
-- 
2.1.1

Reply via email to