[PATCH] ARM: imx25: provide a fixed regulator for usb phys

[Uwe Kleine-König]

The usb phys are internal to the SoC and so it their 5V supply. With
this regulator added explicitly the following (harmless) boot messages
go away:

        usb_phy_generic usbphy:usb-phy@0: usbphy:usb-phy@0 supply vcc not 
found, using dummy regulator
        usb_phy_generic usbphy:usb-phy@1: usbphy:usb-phy@1 supply vcc not 
found, using dummy regulator

Signed-off-by: Uwe Kleine-König <u.kleine-koe...@pengutronix.de>
---
Hello,

note I'm an USB noob, so please consider carefully before applying :-)
I also put the regulator near the usbphy node instead of in alphabetic
order. Not sure what is sensible/usual here, too.

Best regards
Uwe

 arch/arm/boot/dts/imx25.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -614,6 +614,11 @@
                };
        };
 
+       reg_usb: regulator_usbphy {
+               compatible = "regulator-fixed";
+               regulator-name = "usb-phy supply";
+       };
+
        usbphy {
                compatible = "simple-bus";
                #address-cells = <1>;
@@ -623,12 +630,14 @@
                        reg = <0>;
                        compatible = "usb-nop-xceiv";
                        #phy-cells = <0>;
+                       vcc-supply = <&reg_usb>;
                };
 
                usbphy1: usb-phy@1 {
                        reg = <1>;
                        compatible = "usb-nop-xceiv";
                        #phy-cells = <0>;
+                       vcc-supply = <&reg_usb>;
                };
        };
 };
-- 
2.20.1