On Thu, Aug 15, 2019 at 05:42:05PM -0600, Duncan Laurie wrote: > On Wed, Aug 14, 2019 at 6:08 PM Nick Crews <ncr...@chromium.org> wrote: > > > > Adding Duncan Laurie who I think has some more intimate knowledge > > of how this is implemented in HW. Duncan, could you correct or elaborate > > on my answers below as you see fit? Also, sorry if I make some beginner > > mistakes here, I'm just getting familiar with the USB subsystem, and thanks > > for > > your patience. > > > > On Wed, Aug 14, 2019 at 3:20 PM Greg Kroah-Hartman > > <gre...@linuxfoundation.org> wrote: > > > > > > On Wed, Aug 14, 2019 at 02:12:07PM -0600, Nick Crews wrote: > > > > Thanks for the fast response! > > > > > > > > On Tue, Aug 13, 2019 at 12:02 AM Greg Kroah-Hartman > > > > <gre...@linuxfoundation.org> wrote: > > > > > > > > > > On Mon, Aug 12, 2019 at 06:08:43PM -0600, Nick Crews wrote: > > > > > > Hi Greg! > > > > > > > > > > Hi! > > > > > > > > > > First off, please fix your email client to not send html so that vger > > > > > does not reject your messages :) > > > > > > > > Thanks, should be good now. > > > > > > > > > > > > > > > I am working on a Chrome OS device that supports a policy called > > > > > > "USB Power > > > > > > Share," which allows users to turn the laptop into a charge pack > > > > > > for their > > > > > > phone. When the policy is enabled, power will be supplied to the > > > > > > USB ports > > > > > > even when the system is in low power states such as S3 and S5. When > > > > > > disabled, then no power will be supplied in S3 and S5. I wrote a > > > > > > driver > > > > > > <https://lore.kernel.org/patchwork/patch/1062995/> for this already > > > > > > as part > > > > > > of drivers/platform/chrome/, but Enric Balletbo i Serra, the > > > > > > maintainer, > > > > > > had the reasonable suggestion of trying to move this into the USB > > > > > > subsystem. > > > > > > > > > > Correct suggestion. > > > > > > > > > > > Has anything like this been done before? Do you have any preliminary > > > > > > thoughts on this before I start writing code? A few things that I > > > > > > haven't > > > > > > figured out yet: > > > > > > - How to make this feature only available on certain devices. Using > > > > > > device > > > > > > tree? Kconfig? Making a separate driver just for this device that > > > > > > plugs > > > > > > into the USB core? > > > > > > - The feature is only supported on some USB ports, so we need a way > > > > > > of > > > > > > filtering on a per-port basis. > > > > > > > > > > Look at the drivers/usb/typec/ code, I think that should do everything > > > > > you need here as this is a typec standard functionality, right? > > > > > > > > Unfortunately this is for USB 2.0 ports, so it's not type-C. > > > > Is the type-C code still worth looking at? > > > > > > If this is for USB 2, does it use the "non-standard" hub commands to > > > turn on and off power? If so, why not just use the usbreset userspace > > > program for that? > > > > It does not use the standard hub commands. The USB ports are controlled > > by an Embedded Controller (EC), so to control this policy we send a command > > to the EC. Since the command to send to the EC is very specific, this would > > need > > to go into a "hub driver" unique for these Wilco devices. We would make it > > so > > that the normal hub registration is intercepted by something that sees this > > is a > > Wilco device, and instead register the hub as a "wilco-hub", which has its > > own > > special "power_share" sysfs attribute, but still is treated as a normal USB > > hub > > otherwise? > > > > > I would say it is somewhat similar to the USB port power control which > eventually calls into usb_acpi_set_power_state() but in this case it only > affects the behavior when the system is NOT running.
Ok, if this is when the system is not running, why does Linux need to be involved at all? And if Linux is running, why not just follow the USB spec and not create your own craziness? > This design has a standalone USB charge power controller on the board > that passes through the USB2 D+/D- pins from one port and is able to do > BC1.2 negotiation when the host controller is not powered, assuming > the chip has been enabled by the Embedded Controller. So it does follow the spec? Or does not? I can't determine here. If the EC is in charge of all of this, why does Linux need to get involved? > > > And how are you turning a USB 2 port into a power source? That feels > > > really odd given the spec. Is this part of the standard somewhere or > > > just a firmware/hardware hack that you are adding to a device? > > > > The EC twiddles something in the port' HW so that the port turns into a > > DCP (Dedicated Charging Port) and only supplies power, not data. So I > > think yes, this is a bit of a hack that does not conform to the spec. > > > > > > > > Is there some port information in the firmware that describes this > > > functionality? If so, can you expose it through sysfs to the port that > > > way? > > > > [I'm not sure I'm answering your question, but] I believe that we could > > make the BIOS firmware describe the USB ports' capabilities, and the > > kernel's behavior would be gated upon what the firmware reports. I see > > that struct usb_port already contains a "quirks" field, should we add a > > POWER_SHARE quirk to include/linux/usb/quirks.h? I would guess that > > should that should be reserved for quirks shared between many USB > > devices/hubs? > > We could add a Device Property to the affected USB port in ACPI and > describe it that way, similar to other properties like 'vcc-supply', 'clocks', > 'vbus-detect', etc and hook it into the phy-generic driver. > > However I'm not clear on whether the phy driver binding works with XHCI > when using ACPI, so this may not be an appropriate place either. Why would you have DT involved if you are using acpi? :) thanks, greg k-h
