On Tue, Aug 27, 2019 at 02:56:36PM -0400, Alan Stern wrote: > On Wed, 28 Aug 2019, Kai-Heng Feng wrote: > > > Auto-delink requires writing special registers to ums-realtek devices. > > Unconditionally enable auto-delink may break newer devices. > > > > So only enable auto-delink by default for the original three IDs, > > 0x0138, 0x0158 and 0x0159. > > > > Realtek is working on a patch to properly support auto-delink for other > > IDs. > > > > BugLink: https://bugs.launchpad.net/bugs/1838886 > > Signed-off-by: Kai-Heng Feng <kai.heng.f...@canonical.com> > > --- > > v3: > > - Whitelisting instead of adding new module parameter. > > v2: > > - Use auto_delink_support instead of auto_delink_enable. > > > > drivers/usb/storage/realtek_cr.c | 13 ++++++++----- > > 1 file changed, 8 insertions(+), 5 deletions(-) > > > > diff --git a/drivers/usb/storage/realtek_cr.c > > b/drivers/usb/storage/realtek_cr.c > > index beaffac805af..1d9ce9cbc831 100644 > > --- a/drivers/usb/storage/realtek_cr.c > > +++ b/drivers/usb/storage/realtek_cr.c > > @@ -996,12 +996,15 @@ static int init_realtek_cr(struct us_data *us) > > goto INIT_FAIL; > > } > > > > - if (CHECK_FW_VER(chip, 0x5888) || CHECK_FW_VER(chip, 0x5889) || > > - CHECK_FW_VER(chip, 0x5901)) > > - SET_AUTO_DELINK(chip); > > - if (STATUS_LEN(chip) == 16) { > > - if (SUPPORT_AUTO_DELINK(chip)) > > + if (CHECK_PID(chip, 0x0138) || CHECK_PID(chip, 0x0158) || > > + CHECK_PID(chip, 0x0159)) { > > + if (CHECK_FW_VER(chip, 0x5888) || CHECK_FW_VER(chip, 0x5889) || > > + CHECK_FW_VER(chip, 0x5901)) > > SET_AUTO_DELINK(chip); > > + if (STATUS_LEN(chip) == 16) { > > + if (SUPPORT_AUTO_DELINK(chip)) > > + SET_AUTO_DELINK(chip); > > + } > > } > > #ifdef CONFIG_REALTEK_AUTOPM > > if (ss_en) > > For both patches in this series: > > Acked-by: Alan Stern <st...@rowland.harvard.edu> > > Shouldn't this patch go into the -stable kernels as well?
Yes, I can do that. thanks, greg k-h
