If the OMAP's Host controller is in PHY mode then we instantiate
a platform device for the PHY (one for each port in PHY mode) and
hold a reference to it so that we can use the usb_phy API, e.g.
while suspend/resume.
The platform data for the PHY must be supplied in the newly added
.phy_config parameter in struct usbhs_omap_platform_data.
The end goal is to move the PHY's reset and power handling code
out of the ehci-omap driver and into the phy driver.
Signed-off-by: Roger Quadros <rog...@ti.com>
---
drivers/usb/host/ehci-omap.c | 83 ++++++++++++++++++++++++++++++-
include/linux/platform_data/usb-omap.h | 8 +++
2 files changed, 88 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index b96a4bf..e6a2d76 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -61,6 +61,11 @@
static const struct hc_driver ehci_omap_hc_driver;
+struct omap_ehci_hcd {
+ struct usb_hcd *hcd;
+ struct usb_phy **phy; /* one PHY for each port */
+ int nports;
+};
static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
{
@@ -179,6 +184,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
struct usbhs_omap_platform_data *pdata = dev->platform_data;
struct resource *res;
struct usb_hcd *hcd;
+ struct omap_ehci_hcd *omap_hcd;
+ struct usb_phy *phy;
void __iomem *regs;
int ret = -ENODEV;
int irq;
@@ -193,6 +200,25 @@ static int ehci_hcd_omap_probe(struct platform_device
*pdev)
return -ENODEV;
}
+ if (!pdata) {
+ dev_err(dev, "Missing platform data\n");
+ return -ENODEV;
+ }
+
+ omap_hcd = devm_kzalloc(&pdev->dev, sizeof(*omap_hcd), GFP_KERNEL);
+ if (!omap_hcd) {
+ dev_err(dev, "Memory allocation failed\n");
+ return -ENOMEM;
+ }
+
+ omap_hcd->nports = pdata->nports;
+ i = sizeof(struct usb_phy *) * omap_hcd->nports;
+ omap_hcd->phy = devm_kzalloc(&pdev->dev, i, GFP_KERNEL);
+ if (!omap_hcd->phy) {
+ dev_err(dev, "Memory allocation failed\n");
+ return -ENOMEM;
+ }
+
irq = platform_get_irq_byname(pdev, "ehci-irq");
if (irq < 0) {
dev_err(dev, "EHCI irq failed\n");
@@ -223,9 +249,15 @@ static int ehci_hcd_omap_probe(struct platform_device
*pdev)
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
hcd->regs = regs;
+ omap_hcd->hcd = hcd;
+
+ platform_set_drvdata(pdev, omap_hcd);
/* get ehci regulator and enable */
- for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) {
+ for (i = 0 ; i < omap_hcd->nports ; i++) {
+ struct platform_device *phy_pdev;
+ struct usbhs_phy_config *phy_config;
+
if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) {
pdata->regulator[i] = NULL;
continue;
@@ -239,6 +271,33 @@ static int ehci_hcd_omap_probe(struct platform_device
*pdev)
} else {
regulator_enable(pdata->regulator[i]);
}
+
+ /* instantiate PHY */
+ if (!pdata->phy_config[i]) {
+ dev_dbg(dev, "missing phy_config for port %d\n", i);
+ continue;
+ }
+
+ phy_config = pdata->phy_config[i];
+ phy_pdev = platform_device_register_data(&pdev->dev,
+ phy_config->name, i, phy_config->pdata,
+ phy_config->pdata_size);
+ if (IS_ERR(phy_pdev)) {
+ dev_dbg(dev, "error creating PHY device for port %d\n",
+ i);
+ }
+
+ phy = usb_get_phy_from_dev(&phy_pdev->dev);
+ if (IS_ERR(phy)) {
+ dev_dbg(dev, "could not get USB PHY for port %d\n", i);
+ platform_device_unregister(phy_pdev);
+ continue;
+ }
+
+ usb_phy_init(phy);
+ omap_hcd->phy[i] = phy;
+ /* bring PHY out of suspend */
+ usb_phy_set_suspend(omap_hcd->phy[i], 0);
}
pm_runtime_enable(dev);
@@ -269,6 +328,12 @@ err_pm_runtime:
disable_put_regulator(pdata);
pm_runtime_put_sync(dev);
usb_put_hcd(hcd);
+ for (i = 0 ; i < omap_hcd->nports ; i++) {
+ phy = omap_hcd->phy[i];
+ if (!phy)
+ continue;
+ platform_device_unregister(to_platform_device(phy->dev));
+ }
err_io:
iounmap(regs);
@@ -286,14 +351,26 @@ err_io:
*/
static int ehci_hcd_omap_remove(struct platform_device *pdev)
{
- struct device *dev = &pdev->dev;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct device *dev = &pdev->dev;
+ struct omap_ehci_hcd *omap_hcd = dev_get_drvdata(dev);
+ struct usb_hcd *hcd = omap_hcd->hcd;
+ int i;
usb_remove_hcd(hcd);
disable_put_regulator(dev->platform_data);
iounmap(hcd->regs);
usb_put_hcd(hcd);
+ for (i = 0; i < omap_hcd->nports; i++) {
+ struct usb_phy *phy = omap_hcd->phy[i];
+
+ if (!phy)
+ continue;
+
+ usb_phy_shutdown(phy);
+ platform_device_unregister(to_platform_device(phy->dev));
+ }
+
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
diff --git a/include/linux/platform_data/usb-omap.h
b/include/linux/platform_data/usb-omap.h
index d63eb7d..927b8a1 100644
--- a/include/linux/platform_data/usb-omap.h
+++ b/include/linux/platform_data/usb-omap.h
@@ -38,6 +38,12 @@ enum usbhs_omap_port_mode {
OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
};
+struct usbhs_phy_config {
+ char *name; /* binds to device driver */
+ void *pdata; /* platform data for the phy */
+ size_t pdata_size;
+};
+
struct usbhs_omap_platform_data {
int nports;
enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
@@ -49,6 +55,8 @@ struct usbhs_omap_platform_data {
unsigned single_ulpi_bypass:1;
unsigned es2_compatibility:1;
unsigned phy_reset:1;
+
+ struct usbhs_phy_config *phy_config[OMAP3_HS_USB_PORTS];
};
/*-------------------------------------------------------------------------*/
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
