> > > > > > On Thu, 10 Jan 2013, Felipe Balbi wrote:
> > > > > >
> > > > > > > Hi Alan,
> > > > > > >
> > > > > > > with v3.8-rc3, ehci-hcd fails to compile for ARM if I use
> > > > > > > allmodconfig:
> > > > > > >
> > > > > > > drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER"
> > > > > > > redefined [enabled by default]
> > > > > > > drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of
> > > > > > > the previous definition
> > > > > > > drivers/usb/host/ehci-mxc.c:280:31: warning: 'ehci_mxc_driver'
> > > > > > > defined but not used [-Wunused-variable]
> > > > > > > drivers/usb/host/ehci-hcd.c:1285:0: warning: "PLATFORM_DRIVER"
> > > > > > > redefined [enabled by default]
> > > > > > > drivers/usb/host/ehci-hcd.c:1255:0: note: this is the location of
> > > > > > > the previous definition
> > > > > > >
> > > > > > > Looks like the recent ARM multi-arch patches didn't take into
> > > > > > > account
> > > > > > > EHCI-hcd.
Felipe:
Can you confirm that the patch below fixes the allmodconfig build
problem, at least for the ehci-mxc driver? (It wouldn't be surprising
if another module then causes a similar problem; if that happens I'll
try to fix all the outstanding problems with a simple workaround.)
Thanks,
Alan Stern
Index: usb-3.7/drivers/usb/host/ehci-hcd.c
===================================================================
--- usb-3.7.orig/drivers/usb/host/ehci-hcd.c
+++ usb-3.7/drivers/usb/host/ehci-hcd.c
@@ -1250,11 +1250,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_fsl_driver
#endif
-#ifdef CONFIG_USB_EHCI_MXC
-#include "ehci-mxc.c"
-#define PLATFORM_DRIVER ehci_mxc_driver
-#endif
-
#ifdef CONFIG_USB_EHCI_SH
#include "ehci-sh.c"
#define PLATFORM_DRIVER ehci_hcd_sh_driver
@@ -1352,7 +1347,8 @@ MODULE_LICENSE ("GPL");
#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \
!IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \
- !defined(CONFIG_USB_CHIPIDEA_HOST) && \
+ !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \
+ !IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
!defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \
Index: usb-3.7/drivers/usb/host/ehci.h
===================================================================
--- usb-3.7.orig/drivers/usb/host/ehci.h
+++ usb-3.7/drivers/usb/host/ehci.h
@@ -221,6 +221,10 @@ struct ehci_hcd { /* one per controlle
#ifdef DEBUG
struct dentry *debug_dir;
#endif
+
+ /* platform-specific data -- must come last */
+ unsigned long priv[0]
+ __attribute__ ((aligned(sizeof(s64))));
};
/* convert between an HCD pointer and the corresponding EHCI_HCD */
Index: usb-3.7/drivers/usb/host/Kconfig
===================================================================
--- usb-3.7.orig/drivers/usb/host/Kconfig
+++ usb-3.7/drivers/usb/host/Kconfig
@@ -148,7 +148,7 @@ config USB_EHCI_FSL
Variation of ARC USB block used in some Freescale chips.
config USB_EHCI_MXC
- bool "Support for Freescale i.MX on-chip EHCI USB controller"
+ tristate "Support for Freescale i.MX on-chip EHCI USB controller"
depends on USB_EHCI_HCD && ARCH_MXC
select USB_EHCI_ROOT_HUB_TT
---help---
Index: usb-3.7/drivers/usb/host/Makefile
===================================================================
--- usb-3.7.orig/drivers/usb/host/Makefile
+++ usb-3.7/drivers/usb/host/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_PCI) += pci-quirks.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o
+obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
Index: usb-3.7/drivers/usb/host/ehci-mxc.c
===================================================================
--- usb-3.7.orig/drivers/usb/host/ehci-mxc.c
+++ usb-3.7/drivers/usb/host/ehci-mxc.c
@@ -17,76 +17,39 @@
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
#include <mach/hardware.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include <asm/mach-types.h>
+#include "ehci.h"
+
+#define DRIVER_DESC "Freescale On-Chip EHCI Host driver"
+
+static const char hcd_name[] = "ehci-mxc";
+
#define ULPI_VIEWPORT_OFFSET 0x170
struct ehci_mxc_priv {
struct clk *usbclk, *ahbclk, *phyclk;
- struct usb_hcd *hcd;
};
-/* called during probe() after chip reset completes */
-static int ehci_mxc_setup(struct usb_hcd *hcd)
-{
- hcd->has_tt = 1;
-
- return ehci_setup(hcd);
-}
-
-static const struct hc_driver ehci_mxc_hc_driver = {
- .description = hcd_name,
- .product_desc = "Freescale On-Chip EHCI Host Controller",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_USB2 | HCD_MEMORY,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_mxc_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
+static struct hc_driver __read_mostly ehci_mxc_hc_driver;
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+static const struct ehci_driver_overrides ehci_mxc_overrides __initdata = {
+ .extra_priv_size = sizeof(struct ehci_mxc_priv);
};
static int ehci_mxc_drv_probe(struct platform_device *pdev)
@@ -113,12 +76,6 @@ static int ehci_mxc_drv_probe(struct pla
if (!hcd)
return -ENOMEM;
- priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
- if (!priv) {
- ret = -ENOMEM;
- goto err_alloc;
- }
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "Found HC with no register addr. Check setup!\n");
@@ -136,6 +93,10 @@ static int ehci_mxc_drv_probe(struct pla
goto err_alloc;
}
+ hcd->has_tt = 1;
+ ehci = hcd_to_ehci(hcd);
+ priv = (struct ehci_mxc_priv *) ehci->priv;
+
/* enable clocks */
priv->usbclk = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(priv->usbclk)) {
@@ -170,8 +131,6 @@ static int ehci_mxc_drv_probe(struct pla
mdelay(10);
}
- ehci = hcd_to_ehci(hcd);
-
/* EHCI registers start at offset 0x100 */
ehci->caps = hcd->regs + 0x100;
ehci->regs = hcd->regs + 0x100 +
@@ -199,8 +158,7 @@ static int ehci_mxc_drv_probe(struct pla
}
}
- priv->hcd = hcd;
- platform_set_drvdata(pdev, priv);
+ platform_set_drvdata(pdev, hcd);
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
@@ -220,13 +178,16 @@ static int ehci_mxc_drv_probe(struct pla
ULPI_OTG_CTRL);
if (ret) {
dev_err(dev, "unable to set CHRVBUS\n");
- goto err_add;
+ goto err_chrgvbus;
}
}
}
return 0;
+err_chrgvbus:
+ usb_remove_hcd(hcd);
+
err_add:
if (pdata && pdata->exit)
pdata->exit(pdev);
@@ -245,8 +206,11 @@ err_alloc:
static int __exit ehci_mxc_drv_remove(struct platform_device *pdev)
{
struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data;
- struct ehci_mxc_priv *priv = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = priv->hcd;
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct ehci_mxc_priv *priv = (struct ehci_mxc_priv *) ehci->priv;
+
+ usb_remove_hcd(hcd);
if (pdata && pdata->exit)
pdata->exit(pdev);
@@ -254,23 +218,20 @@ static int __exit ehci_mxc_drv_remove(st
if (pdata->otg)
usb_phy_shutdown(pdata->otg);
- usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
- platform_set_drvdata(pdev, NULL);
-
clk_disable_unprepare(priv->usbclk);
clk_disable_unprepare(priv->ahbclk);
if (priv->phyclk)
clk_disable_unprepare(priv->phyclk);
+ usb_put_hcd(hcd);
+ platform_set_drvdata(pdev, NULL);
return 0;
}
static void ehci_mxc_drv_shutdown(struct platform_device *pdev)
{
- struct ehci_mxc_priv *priv = platform_get_drvdata(pdev);
- struct usb_hcd *hcd = priv->hcd;
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
@@ -280,9 +241,31 @@ MODULE_ALIAS("platform:mxc-ehci");
static struct platform_driver ehci_mxc_driver = {
.probe = ehci_mxc_drv_probe,
- .remove = __exit_p(ehci_mxc_drv_remove),
+ .remove = ehci_mxc_drv_remove,
.shutdown = ehci_mxc_drv_shutdown,
.driver = {
- .name = "mxc-ehci",
+ .name = hcd_name,
},
};
+
+static int __init ehci_mxc_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ehci_init_driver(&ehci_mxc_hc_driver, &ehci_mxc_overrides);
+ return platform_driver_register(&ehci_mxc_driver);
+}
+module_init(ehci_mxc_init);
+
+static void __exit ehci_mxc_cleanup(void)
+{
+ platform_driver_unregister(&ehci_mxc_driver);
+}
+module_exit(ehci_mxc_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Sascha Hauer");
+MODULE_LICENSE("GPL");
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
