On 02/15/2013 06:24 PM, Manjunath Goudar wrote:
Separate the Atmel host controller driver from ehci-hcd host code into its own driver module.In V2: Resolved below compiler error. drivers/usb/host/ehci-atmel.c: In function 'ehci_atmel_drv_remove': drivers/usb/host/ehci-atmel.c:167: error: implicit declaration of function 'ehci_shutdown' Signed-off-by: Manjunath Goudar<manjunath.gou...@linaro.org> Cc: Alan Stern<st...@rowland.harvard.edu> Cc: Greg KH<g...@kroah.com> Cc: Grant Likely<grant.lik...@secretlab.ca> Cc: Rob Herring<rob.herr...@calxeda.com> Cc: Andrew Victor<li...@maxim.org.za> Cc: Nicolas Ferre<nicolas.fe...@atmel.com> Cc: Jean-Christophe Plagniol-Villard<plagn...@jcrosoft.com> Cc: linux-usb@vger.kernel.org Cc: linux-ker...@vger.kernel.org --- drivers/usb/host/Kconfig | 8 +++++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-atmel.c | 76 ++++++++++++++++++++++------------------- drivers/usb/host/ehci-hcd.c | 10 ++---- drivers/usb/host/ehci.h | 2 +- 5 files changed, 53 insertions(+), 44 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 15e8032..1ef37d7 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -170,6 +170,14 @@ config USB_EHCI_HCD_SPEAR Enables support for the on-chip EHCI controller on ST SPEAr chips. +config USB_EHCI_HCD_AT91 + tristate "Support for Atmel on-chip EHCI USB controller" + depends on USB_EHCI_HCD&& ARCH_AT91 + default y + ---help--- + Enables support for the on-chip EHCI controller on + Atmel chips. + config USB_EHCI_MSM bool "Support for MSM on-chip EHCI USB controller" depends on USB_EHCI_HCD&& ARCH_MSM diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index c8fcde9..b301243 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o obj-$(CONFIG_USB_EHCI_HCD_SPEAR)+= ehci-spear.o obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o +obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 27639487..3cd0dd4 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -15,6 +15,19 @@ #include<linux/platform_device.h> #include<linux/of.h> #include<linux/of_platform.h> +#include<linux/kernel.h> +#include<linux/module.h> +#include<linux/usb.h> +#include<linux/usb/hcd.h> +#include<linux/io.h> +#include<linux/dma-mapping.h> + +#include "ehci.h" + +#define DRIVER_DESC "EHCI atmel driver" + +static const char hcd_name[] = "ehci-atmel"; +static struct hc_driver __read_mostly ehci_atmel_hc_driver; /* interface and function clocks */ static struct clk *iclk, *fclk; @@ -60,41 +73,6 @@ static int ehci_atmel_setup(struct usb_hcd *hcd) return ehci_setup(hcd); } -static const struct hc_driver ehci_atmel_hc_driver = { - .description = hcd_name, - .product_desc = "Atmel EHCI UHP HS", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* generic hardware linkage */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - /* basic lifecycle operations */ - .reset = ehci_atmel_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* managing i/o requests and associated device resources */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* scheduling support */ - .get_frame_number = ehci_get_frame, - - /* root hub support */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32); static int ehci_atmel_drv_probe(struct platform_device *pdev) @@ -210,7 +188,33 @@ static struct platform_driver ehci_atmel_driver = { .remove = ehci_atmel_drv_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { - .name = "atmel-ehci", + .name = hcd_name,
This change will cause atmel ehci won't work with the none device tree kernel.
it can be fixed with replace other places using "atmel-ehci" with <hcd_name>, that means replace "atmel-ehci" with "ehci-atmel" at other places.
Best Regards, Bo Shen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
