Remove bogus (and unnecessary) test for serial->dev being NULL in close.
The device is never cleared, and close is never called after a completed
disconnect anyway.
Remove some out-commented bogus code while at it.
Signed-off-by: Johan Hovold <jhov...@gmail.com>
---
drivers/usb/serial/keyspan.c | 26 +++++++-------------------
1 file changed, 7 insertions(+), 19 deletions(-)
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 1fd1935..6abe8a4 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1115,7 +1115,6 @@ static void keyspan_dtr_rts(struct usb_serial_port *port,
int on)
static void keyspan_close(struct usb_serial_port *port)
{
int i;
- struct usb_serial *serial = port->serial;
struct keyspan_port_private *p_priv;
p_priv = usb_get_serial_port_data(port);
@@ -1123,28 +1122,17 @@ static void keyspan_close(struct usb_serial_port *port)
p_priv->rts_state = 0;
p_priv->dtr_state = 0;
- if (serial->dev) {
- keyspan_send_setup(port, 2);
- /* pilot-xfer seems to work best with this delay */
- mdelay(100);
- /* keyspan_set_termios(port, NULL); */
- }
-
- /*while (p_priv->outcont_urb->status == -EINPROGRESS) {
- dev_dbg(&port->dev, "%s - urb in progress\n", __func__);
- }*/
+ keyspan_send_setup(port, 2);
+ /* pilot-xfer seems to work best with this delay */
+ mdelay(100);
p_priv->out_flip = 0;
p_priv->in_flip = 0;
- if (serial->dev) {
- /* Stop reading/writing urbs */
- stop_urb(p_priv->inack_urb);
- /* stop_urb(p_priv->outcont_urb); */
- for (i = 0; i < 2; i++) {
- stop_urb(p_priv->in_urbs[i]);
- stop_urb(p_priv->out_urbs[i]);
- }
+ stop_urb(p_priv->inack_urb);
+ for (i = 0; i < 2; i++) {
+ stop_urb(p_priv->in_urbs[i]);
+ stop_urb(p_priv->out_urbs[i]);
}
}
--
1.8.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
