The current ST Micro Connect Lite uses the FT4232H hi-speed quad USB UART
FTDI chip. It is also possible to drive STM reference targets populated with an
on-board JTAG debugger based on the FT2232H chip with the same
STMicroelectronics tools.
For this reason, the ST Micro Connect Lite PIDs should be
ST_STMCLT_2232_PID: 0x3746
ST_STMCLT_4232_PID: 0x3747
Signed-off-by: Adrian Thomasset <adrian.thomas...@st.com>
---
drivers/usb/serial/ftdi_sio.c | 4 +++-
drivers/usb/serial/ftdi_sio_ids.h | 3 ++-
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 9886180..6be5853 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -870,7 +870,9 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
- { USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
+ { USB_DEVICE(ST_VID, ST_STMCLT_2232_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(ST_VID, ST_STMCLT_4232_PID),
.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
diff --git a/drivers/usb/serial/ftdi_sio_ids.h
b/drivers/usb/serial/ftdi_sio_ids.h
index e79861e..04cb340 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1150,7 +1150,8 @@
* STMicroelectonics
*/
#define ST_VID 0x0483
-#define ST_STMCLT1030_PID 0x3747 /* ST Micro Connect Lite STMCLT1030 */
+#define ST_STMCLT_2232_PID 0x3746
+#define ST_STMCLT_4232_PID 0x3747
/*
* Papouch products (http://www.papouch.com/)
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
