Now that the EHCI internal buffer setup is done by the platform code, we can remove such code from this driver as it never really belonged here. We also no longer need the 2nd memory region now (2nd EHCI controller is simply missing in e.g. R8A7778 SoC).
The patch has been tested on the Marzen and BOCK-W boards. Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto...@renesas.com> Acked-by: Simon Horman <horms+rene...@verge.net.au> Acked-by: Felipe Balbi <ba...@ti.com> --- Changes since version 6: - added an ACK from Felipe Balbi. Changes since version 2: - added a note about testing to the changelog; - added ACKs from Simon Horman and Kuninori Morimoto. Changes since the original posting: - split R8A7779 SoC file change to a separate patch. drivers/usb/phy/rcar-phy.c | 28 ++++------------------------ 1 file changed, 4 insertions(+), 24 deletions(-) Index: renesas/drivers/usb/phy/rcar-phy.c =================================================================== --- renesas.orig/drivers/usb/phy/rcar-phy.c +++ renesas/drivers/usb/phy/rcar-phy.c @@ -23,8 +23,6 @@ #define USBEH0 0x080C #define USBOH0 0x081C #define USBCTL0 0x0858 -#define EIIBC1 0x0094 -#define EIIBC2 0x009C /* USBPCTRL1 */ #define PHY_RST (1 << 2) @@ -40,7 +38,6 @@ struct rcar_usb_phy_priv { spinlock_t lock; void __iomem *reg0; - void __iomem *reg1; int counter; }; @@ -59,7 +56,6 @@ static int rcar_usb_phy_init(struct usb_ struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy); struct device *dev = phy->dev; void __iomem *reg0 = priv->reg0; - void __iomem *reg1 = priv->reg1; int i; u32 val; unsigned long flags; @@ -97,19 +93,6 @@ static int rcar_usb_phy_init(struct usb_ iowrite32(0x00000000, (reg0 + USBPCTRL0)); /* - * EHCI IP internal buffer setting - * EHCI IP internal buffer enable - * - * These are recommended value of a datasheet - * see [USB :: EHCI internal buffer setting] - */ - iowrite32(0x00ff0040, (reg0 + EIIBC1)); - iowrite32(0x00ff0040, (reg1 + EIIBC1)); - - iowrite32(0x00000001, (reg0 + EIIBC2)); - iowrite32(0x00000001, (reg1 + EIIBC2)); - - /* * Bus alignment settings */ @@ -145,14 +128,13 @@ static void rcar_usb_phy_shutdown(struct static int rcar_usb_phy_probe(struct platform_device *pdev) { struct rcar_usb_phy_priv *priv; - struct resource *res0, *res1; + struct resource *res0; struct device *dev = &pdev->dev; - void __iomem *reg0, *reg1; + void __iomem *reg0; int ret; res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); - res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res0 || !res1) { + if (!res0) { dev_err(dev, "Not enough platform resources\n"); return -EINVAL; } @@ -164,8 +146,7 @@ static int rcar_usb_phy_probe(struct pla * this driver can't use devm_request_and_ioremap(dev, res) here */ reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0)); - reg1 = devm_ioremap_nocache(dev, res1->start, resource_size(res1)); - if (!reg0 || !reg1) { + if (!reg0) { dev_err(dev, "ioremap error\n"); return -ENOMEM; } @@ -177,7 +158,6 @@ static int rcar_usb_phy_probe(struct pla } priv->reg0 = reg0; - priv->reg1 = reg1; priv->counter = 0; priv->phy.dev = dev; priv->phy.label = dev_name(dev); -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html