On Saturday 25 May 2013, Adrien Vergé wrote: > On OMAP4 platforms, EHCI HCD needs the physical layer signalling > activated, along with the NOP USB Transceiver driver. Otherwise, the > kernel boots without registering any USB device.
This does not actually sound like a critical error: If a user forgets to enable a driver, that driver will not be loaded. Of course the kernel should not just crash when a non-essential driver is missing, and it should not fail to build, but your description sounds harmless. Am I missing something? > This patch applies to Linux 3.10-rc2. > > Signed-off-by: Adrien Vergé <adrienve...@gmail.com> > --- > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index de94f26..47959d7 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -44,6 +44,8 @@ endif # USB_XHCI_HCD > config USB_EHCI_HCD > tristate "EHCI HCD (USB 2.0) support" This is the wrong place: it should be in USB_EHCI_HCD_OMAP if any. > depends on USB_ARCH_HAS_EHCI > + select USB_PHY if ARCH_OMAP4 > + select NOP_USB_XCEIV if ARCH_OMAP4 > ---help--- > The Enhanced Host Controller Interface (EHCI) is standard for USB > 2.0 > "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. 'select'ing USB_PHY sounds wrong too, I think you mean 'depends on'. Also note that Roger Quadros has just removed the 'select NOP_USB_XCEIV' there, I think you should coordinate with him. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html