DM9620 is an USB2.0 network adapter rather than DM9601 USB1.1. This
driver processed the RX data 4 bytes header, TX data 2 bytes header,
make the control bit exactly right in PHY write function, and optional
IFF_ALLMUTLI bit for RX control.
Tested good for many platforms, include X86 desktop and ARM embedded.
Signed-off-by: Joseph CHANG <josright...@gmail.com>
---
drivers/net/usb/Kconfig | 13 +
drivers/net/usb/Makefile | 1 +
drivers/net/usb/dm9620.c | 796 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 810 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/usb/dm9620.c
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 287cc62..e9c9e2a 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -272,6 +272,19 @@ config USB_NET_DM9601
This option adds support for Davicom DM9601 based USB 1.1
10/100 Ethernet adapters.
+config USB_NET_DM9620
+ tristate "Davicom DM9620/21 based USB 2.0 10/100 ethernet devices"
+ depends on USB_USBNET
+ select CRC32
+ help
+ This option adds support for Davicom DM9620 based USB 2.0
+ 10/100 Ethernet adapters.
+
+ This driver creates an interface named "ethX", where X depends on
+ what other networking devices you have in use.
+
+ To compile this driver as a module, choose M here.
+
config USB_NET_SMSC75XX
tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices"
depends on USB_USBNET
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index 9ab5c9d..7d95e5c 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_USB_NET_AX88179_178A) += ax88179_178a.o
obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o
obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
+obj-$(CONFIG_USB_NET_DM9620) += dm9620.o
obj-$(CONFIG_USB_NET_SMSC75XX) += smsc75xx.o
obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o
obj-$(CONFIG_USB_NET_GL620A) += gl620a.o
diff --git a/drivers/net/usb/dm9620.c b/drivers/net/usb/dm9620.c
new file mode 100644
index 0000000..aa4226b
--- /dev/null
+++ b/drivers/net/usb/dm9620.c
@@ -0,0 +1,796 @@
+/*
+ * Davicom DM9620 USB 2.0 10/100Mbps ethernet devices
+ *
+ * Peter Korsgaard <jac...@sunsite.dk>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/* #define DEBUG */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+
+/* control requests */
+#define DM_READ_REGS 0x00
+#define DM_WRITE_REGS 0x01
+#define DM_READ_MEMS 0x02
+#define DM_WRITE_REG 0x03
+#define DM_WRITE_MEMS 0x05
+#define DM_WRITE_MEM 0x07
+
+/* registers */
+#define DM_NET_CTRL 0x00
+#define DM_RX_CTRL 0x05
+#define DM_FCR 0x0a
+#define DM_SHARED_CTRL 0x0b
+#define DM_SHARED_ADDR 0x0c
+#define DM_SHARED_DATA 0x0d /* low + high */
+#define DM_SHARED_DL 0x0d
+#define DM_SHARED_DH 0x0e
+#define DM_WAKEUP_CTRL 0x0f
+#define DM_PHY_ADDR 0x10 /* 6 bytes */
+#define DM_MCAST_ADDR 0x16 /* 8 bytes */
+#define DM_GPR_CTRL 0x1e
+#define DM_GPR_DATA 0x1f
+#define DM_PID 0x2a
+#define DM_CHIP_ID 0x2c
+#define DM_XPHY_CTRL 0x2e /* reserved */
+#define DM_TX_CRC_CTRL 0x31
+#define DM_RX_CRC_CTRL 0x32
+#define DM_AZR 0x3f /* reserved */
+#define DM_USB_CTRL 0xf4
+#define DM_MODE_CTRL 0x91 /* only on dm9620 */
+#define DM_CHIP_ID_EX 0x5C
+
+#define MD96XX_EEPROM_MAGIC 0x9620
+#define DM_MAX_MCAST 64
+#define DM_MCAST_SIZE 8
+#define DM_EEPROM_LEN 256
+#define DM_TX_OVERHEAD 2 /* 2 byte header */
+#define DM_RX_OVERHEAD 8 /* 4 byte header + 4 byte crc tail */
+#define DM_TIMEOUT 1000
+
+#define DM_NCR_RST (1<<0)
+#define DM_NCR_WAKEEN (1<<6)
+
+#define DM_FCR_TXPEN (1<<5)
+#define DM_FCR_BKPM (1<<3)
+#define DM_FCR_FLCE (1<<0)
+
+#define DMSC_WEP (1<<4)
+#define DMSC_ERPRW (1<<1)
+#define DMSC_ERRE (1<<0)
+
+#define DM_LINKEN (1<<5)
+#define DM_MAGICEN (1<<3)
+
+#define DM_TX_UDPCSE (1<<2)
+#define DM_TX_TCPCSE (1<<1)
+#define DM_TX_IPCSE (1<<0)
+#define DM_RX_RCSEN (1<<1)
+#define DM_MODE_DM_TXRX (0<<4)
+#define DM_MODE_CDC_TRX (1<<4)
+#define DM_MODE_DM_DESC (0<<5)
+#define DM_MODE_CDC_DES (1<<5)
+
+#define DM_USB_EP3ACK (1<<5)
+
+#define DM_MODE9601 (0<<7)
+#define DM_MODE9620 (1<<7)
+#define DM9620_PHY_ID 1 /* Stone add For kernel read phy register */
+
+#define VID_DAVICOM 0x0a46
+
+#define PID_DM9620 0x9620
+#define PID_DM9621 0x9621
+#define PID_DM9622 0x9622
+#define PID_DM9620A 0x0269
+#define PID_DM9621A 0x1269
+
+static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+ int err;
+ err = usbnet_read_cmd(dev, DM_READ_REGS,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, reg, data, length);
+ if (err != length && err >= 0)
+ err = -EINVAL;
+ return err;
+}
+
+static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value)
+{
+ return dm_read(dev, reg, 1, value);
+}
+
+static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+ int err;
+ err = usbnet_write_cmd(dev, DM_WRITE_REGS,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE,
+ 0, reg, data, length);
+
+ if (err >= 0 && err < length)
+ err = -EINVAL;
+ return err;
+}
+
+static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value)
+{
+ return usbnet_write_cmd(dev, DM_WRITE_REG,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE,
+ value, reg, NULL, 0);
+}
+
+static void dm_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+ usbnet_write_cmd_async(dev, DM_WRITE_REGS,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, reg, data, length);
+}
+
+static void dm_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
+{
+ usbnet_write_cmd_async(dev, DM_WRITE_REG,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value, reg, NULL, 0);
+}
+
+static int dm_read_shared_word(struct usbnet *dev, int phy, u8 reg,
+ __le16 *value)
+{
+ int ret, i;
+
+ mutex_lock(&dev->phy_mutex);
+
+ dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
+ dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0xc : 0x4);
+
+ for (i = 0; i < DM_TIMEOUT; i++) {
+ u8 tmp = 0;
+
+ udelay(1);
+ ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
+ if (ret < 0)
+ goto out;
+
+ /* ready */
+ if ((tmp & 1) == 0)
+ break;
+ }
+
+ if (i == DM_TIMEOUT) {
+ netdev_err(dev->net, "%s read timed out!\n",
+ phy ? "phy" : "eeprom");
+ ret = -EIO;
+ goto out;
+ }
+
+ dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
+ ret = dm_read(dev, DM_SHARED_DATA, 2, value);
+
+ netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n",
+ phy, reg, *value, ret);
+
+ out:
+ mutex_unlock(&dev->phy_mutex);
+ return ret;
+}
+
+static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg,
+ __le16 value)
+{
+ int ret, i;
+
+ mutex_lock(&dev->phy_mutex);
+
+ ret = dm_write(dev, DM_SHARED_DATA, 2, &value);
+ if (ret < 0)
+ goto out;
+
+ dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
+ dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x0a : 0x12);
+
+ for (i = 0; i < DM_TIMEOUT; i++) {
+ u8 tmp = 0;
+
+ udelay(1);
+ ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
+ if (ret < 0)
+ goto out;
+
+ /* ready */
+ if ((tmp & 1) == 0)
+ break;
+ }
+
+ if (i == DM_TIMEOUT) {
+ netdev_err(dev->net, "%s write timed out!\n",
+ phy ? "phy" : "eeprom");
+ ret = -EIO;
+ goto out;
+ }
+
+ dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
+
+out:
+ mutex_unlock(&dev->phy_mutex);
+ return ret;
+}
+
+static void device_polling(struct usbnet *dev, u8 reg, u8 dmsc_bit,
+ u8 uexpected)
+{
+ int i, ret;
+ u8 tmp = 0;
+ for (i = 0; i < DM_TIMEOUT; i++) {
+ udelay(1);
+ ret = dm_read_reg(dev, reg, &tmp);
+ if (ret < 0) {
+ netdev_err(dev->net,
+ "[dm962 read reg] (reg: 0x%02x) error!\n",
+ reg);
+ break;
+ }
+ if ((tmp & dmsc_bit) == uexpected) /* ready */
+ break;
+ }
+ if (i == DM_TIMEOUT)
+ netdev_err(dev->net, "[dm962 time out] on polling bit:0x%x\n",
+ dmsc_bit);
+}
+
+static void dm_write_eeprom_word(struct usbnet *dev, u8 offset, u8 *data)
+{
+ mutex_lock(&dev->phy_mutex);
+
+ dm_write_reg(dev, DM_SHARED_ADDR, offset);
+ dm_write_reg(dev, DM_SHARED_DH, data[1]);
+ dm_write_reg(dev, DM_SHARED_DL, data[0]);
+ dm_write_reg(dev, DM_SHARED_CTRL, DMSC_WEP | DMSC_ERPRW);
+ device_polling(dev, DM_SHARED_CTRL, DMSC_ERRE, 0x00);
+ dm_write_reg(dev, DM_SHARED_CTRL, 0);
+
+ mutex_unlock(&dev->phy_mutex);
+}
+
+static int dm_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
+{
+ return dm_read_shared_word(dev, 0, offset, value);
+}
+
+static int dm9620_set_eeprom(struct net_device *net,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct usbnet *dev = netdev_priv(net);
+ int offset = eeprom->offset;
+ int len = eeprom->len;
+ int done;
+
+ if (eeprom->magic != MD96XX_EEPROM_MAGIC) {
+ netdev_err(dev->net, "EEPROM: magic value mismatch, magic =
0x%x\n",
+ eeprom->magic);
+ return -EINVAL;
+ }
+
+ while (len > 0) {
+ if (len & 1 || offset & 1) {
+ int which = offset & 1;
+ u8 tmp[2];
+ dm_read_eeprom_word(dev, offset / 2, tmp);
+ tmp[which] = *data;
+ dm_write_eeprom_word(dev, offset / 2, tmp);
+ usleep_range(10000, 15000);
+ done = 1;
+ } else {
+ dm_write_eeprom_word(dev, offset / 2, data);
+ done = 2;
+ }
+ data += done;
+ offset += done;
+ len -= done;
+ }
+ return 0;
+}
+
+static int dm9620_get_eeprom_len(struct net_device *dev)
+{
+ return DM_EEPROM_LEN;
+}
+
+static int dm9620_get_eeprom(struct net_device *net,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct usbnet *dev = netdev_priv(net);
+ __le16 *ebuf = (__le16 *) data;
+ int i;
+
+ /* access is 16bit */
+ if ((eeprom->offset % 2) || (eeprom->len % 2))
+ return -EINVAL;
+
+ for (i = 0; i < eeprom->len / 2; i++) {
+ if (dm_read_eeprom_word(dev, eeprom->offset / 2 + i,
+ &ebuf[i]) < 0)
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int dm9620_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+
+ __le16 res;
+
+ dm_read_shared_word(dev, 1, loc, &res);
+
+ netdev_dbg(dev->net,
+ "dm9620_mdio_read() phy_id=0x%02x, loc=0x%02x,
returns=0x%04x\n",
+ phy_id, loc, le16_to_cpu(res));
+
+ return le16_to_cpu(res);
+}
+
+static void dm9620_mdio_write(struct net_device *netdev, int phy_id, int loc,
+ int val)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ __le16 res = cpu_to_le16(val);
+
+
+ netdev_dbg(dev->net, "dm9620_mdio_write() phy_id=0x%02x, loc=0x%02x,
val=0x%04x\n",
+ phy_id, loc, val);
+
+ dm_write_shared_word(dev, 1, loc, res);
+}
+
+static void dm9620_get_drvinfo(struct net_device *net,
+ struct ethtool_drvinfo *info)
+{
+ /* Inherit standard device info */
+ usbnet_get_drvinfo(net, info);
+ info->eedump_len = DM_EEPROM_LEN;
+}
+
+static u32 dm9620_get_link(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return mii_link_ok(&dev->mii);
+}
+
+static int dm9620_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static void
+dm9620_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt;
+
+ if (dm_read_reg(dev, DM_WAKEUP_CTRL, &opt) < 0) {
+ wolinfo->supported = 0;
+ wolinfo->wolopts = 0;
+ return;
+ }
+ wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+ wolinfo->wolopts = 0;
+
+ if (opt & DM_LINKEN)
+ wolinfo->wolopts |= WAKE_PHY;
+ if (opt & DM_MAGICEN)
+ wolinfo->wolopts |= WAKE_MAGIC;
+}
+
+static int
+dm9620_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt = 0;
+
+ if (wolinfo->wolopts & WAKE_PHY)
+ opt |= DM_LINKEN;
+ if (wolinfo->wolopts & WAKE_MAGIC)
+ opt |= DM_MAGICEN;
+
+ dm_write_reg(dev, DM_WAKEUP_CTRL, opt);
+ /* enable WAKEEN */
+ return dm_write_reg(dev, DM_NET_CTRL, DM_NCR_WAKEEN);
+}
+
+static const struct ethtool_ops dm9620_ethtool_ops = {
+ .get_drvinfo = dm9620_get_drvinfo,
+ .get_link = dm9620_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_eeprom_len = dm9620_get_eeprom_len,
+ .get_eeprom = dm9620_get_eeprom,
+ .set_eeprom = dm9620_set_eeprom,
+ .get_settings = usbnet_get_settings,
+ .set_settings = usbnet_set_settings,
+ .nway_reset = usbnet_nway_reset,
+ .get_wol = dm9620_get_wol,
+ .set_wol = dm9620_set_wol,
+};
+
+static void dm9620_set_multicast(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ /* We use the 20 byte dev->data for our 8 byte filter buffer
+ * to avoid allocating memory that is tricky to free later
+ */
+ u8 *hashes = (u8 *) &dev->data;
+ u8 rx_ctl = 0x31;
+
+ memset(hashes, 0, DM_MCAST_SIZE);
+ hashes[DM_MCAST_SIZE - 1] |= 0x80; /* broadcast address */
+
+ if (net->flags & IFF_PROMISC) {
+ rx_ctl |= 0x02;
+ } else if (net->flags & IFF_ALLMULTI ||
+ netdev_mc_count(net) > DM_MAX_MCAST) {
+ rx_ctl |= 0x08;
+ } else if (!netdev_mc_empty(net)) {
+ struct netdev_hw_addr *ha;
+
+ netdev_for_each_mc_addr(ha, net) {
+ u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26;
+ hashes[crc >> 3] |= 1 << (crc & 0x7);
+ }
+ }
+
+ dm_write_async(dev, DM_MCAST_ADDR, DM_MCAST_SIZE, hashes);
+ dm_write_reg_async(dev, DM_RX_CTRL, rx_ctl);
+}
+
+static void __dm9620_set_mac_address(struct usbnet *dev)
+{
+ dm_write_async(dev, DM_PHY_ADDR, ETH_ALEN, dev->net->dev_addr);
+}
+
+static int dm9620_set_mac_address(struct net_device *net, void *p)
+{
+ struct sockaddr *addr = p;
+ struct usbnet *dev = netdev_priv(net);
+
+ if (!is_valid_ether_addr(addr->sa_data)) {
+ dev_err(&net->dev, "not setting invalid mac address %pM\n",
+ addr->sa_data);
+ return -EINVAL;
+ }
+
+ memcpy(net->dev_addr, addr->sa_data, net->addr_len);
+ __dm9620_set_mac_address(dev);
+
+ return 0;
+}
+
+static const struct net_device_ops dm9620_netdev_ops = {
+ .ndo_open = usbnet_open,
+ .ndo_stop = usbnet_stop,
+ .ndo_start_xmit = usbnet_start_xmit,
+ .ndo_tx_timeout = usbnet_tx_timeout,
+ .ndo_change_mtu = usbnet_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_do_ioctl = dm9620_ioctl,
+ .ndo_set_rx_mode = dm9620_set_multicast,
+ .ndo_set_mac_address = dm9620_set_mac_address,
+};
+
+static int dm9620_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret;
+ u8 mac[ETH_ALEN], id;
+ u16 value;
+
+ ret = usbnet_get_endpoints(dev, intf);
+ if (ret)
+ return ret;
+
+ dev->net->netdev_ops = &dm9620_netdev_ops;
+ dev->net->ethtool_ops = &dm9620_ethtool_ops;
+ dev->net->hard_header_len += DM_TX_OVERHEAD;
+ dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+
+ /* ftp fail fixed */
+ dev->rx_urb_size = dev->net->mtu + ETH_HLEN + DM_RX_OVERHEAD+1;
+
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = dm9620_mdio_read;
+ dev->mii.mdio_write = dm9620_mdio_write;
+ dev->mii.phy_id_mask = 0x1f;
+ dev->mii.reg_num_mask = 0x1f;
+ dev->mii.phy_id = DM9620_PHY_ID;
+
+ /* reset */
+ dm_write_reg(dev, DM_NET_CTRL, 1);
+ usleep_range(20, 30);
+
+ /* read MAC */
+ if (dm_read(dev, DM_PHY_ADDR, ETH_ALEN, mac) < 0) {
+ netdev_err(dev->net, "Error reading MAC address\n");
+ return -ENODEV;
+ }
+
+ /* Overwrite the auto-generated address only with good ones */
+ if (is_valid_ether_addr(mac))
+ memcpy(dev->net->dev_addr, mac, ETH_ALEN);
+ else {
+ netdev_warn(dev->net,
+ "dm9620: No valid MAC address in EEPROM, using %pM\n",
+ dev->net->dev_addr);
+ __dm9620_set_mac_address(dev);
+ }
+
+ if (dm_read_reg(dev, DM_CHIP_ID, &id) < 0) {
+ netdev_err(dev->net, "Error reading chip ID\n");
+ return -ENODEV;
+ }
+
+ dm_read(dev, DM_PID, 2, &value);
+
+ /* Add for check Product dm9620a/21a */
+ if (value == PID_DM9620A || value == PID_DM9621A)
+ dm_write_reg(dev, DM_MODE_CTRL, DM_MODE9620 | DM_MODE_CDC_DES);
+ else
+ dm_write_reg(dev, DM_MODE_CTRL, DM_MODE9620);
+
+ dm_write_reg(dev, DM_RX_CRC_CTRL, DM_RX_RCSEN);
+
+ /* power up phy */
+ dm_write_reg(dev, DM_GPR_CTRL, 1);
+ dm_write_reg(dev, DM_GPR_DATA, 0);
+
+ /* receive broadcast packets */
+ dm9620_set_multicast(dev->net);
+
+ dm9620_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+
+ /* TX Pause Packet Enable */
+ dm_write_reg(dev, DM_FCR, DM_FCR_TXPEN | DM_FCR_BKPM | DM_FCR_FLCE);
+
+ /* Pause Capability on */
+ dm9620_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+
+ dm_write_reg(dev, DM_USB_CTRL, DM_USB_EP3ACK);
+
+ mii_nway_restart(&dev->mii);
+
+ return 0;
+}
+
+static void dm9620_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+ netdev_warn(dev->net, "[dm962] Linux Driver = V2.6 - unbind\n");
+}
+
+static int dm9620_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ u8 status;
+ int len;
+
+ /* format:
+ * b0: rx_flag
+ * b1: rx status
+ * b2: packet length (incl crc) low
+ * b3: packet length (incl crc) high
+ * b4..n-4: packet data
+ * bn-3..bn: ethernet crc
+ */
+ if (unlikely(skb->len < DM_RX_OVERHEAD)) {
+ dev_err(&dev->udev->dev, "unexpected tiny rx frame\n");
+ return 0;
+ }
+
+ status = skb->data[1];
+ len = (skb->data[2] | (skb->data[3] << 8)) - 4;
+
+ if (unlikely(status & 0xbf)) {
+ if (status & 0x01)
+ dev->net->stats.rx_fifo_errors++;
+ if (status & 0x02)
+ dev->net->stats.rx_crc_errors++;
+ if (status & 0x04)
+ dev->net->stats.rx_frame_errors++;
+ if (status & 0x20)
+ dev->net->stats.rx_missed_errors++;
+ if (status & 0x90)
+ dev->net->stats.rx_length_errors++;
+ return 0;
+ }
+
+ skb_pull(skb, 4);
+ skb_trim(skb, len);
+
+ return 1;
+}
+
+static bool davicom_bulkout_fix(int len, unsigned fullp)
+{
+ len = ((len+1)/2)*2;
+ len += 2;
+ return !(len % fullp) ? true : false;
+}
+
+static int dm9620_tx_oddadd_len(int len)
+{
+ return len & 1;
+}
+
+static int dm9620_tx_fulladd_len(int len, unsigned full_pld)
+{
+ if (davicom_bulkout_fix(len, full_pld))
+ return 2;
+ return 0;
+}
+
+static struct sk_buff *dm9620_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+ gfp_t flags)
+{
+ int len;
+ int oddadd_len, fulladd_len, newtailroom;
+
+ /* format:
+ * b1: packet length low
+ * b2: packet length high
+ * b3..n: packet data
+ */
+ len = skb->len;
+
+ oddadd_len = dm9620_tx_oddadd_len(len);
+ fulladd_len = dm9620_tx_fulladd_len(len, dev->maxpacket);
+ newtailroom = oddadd_len + fulladd_len;
+
+ if (skb_headroom(skb) < DM_TX_OVERHEAD ||
+ skb_tailroom(skb) < newtailroom) {
+ struct sk_buff *skb2;
+
+ if (skb_headroom(skb) < DM_TX_OVERHEAD &&
+ skb_tailroom(skb) < newtailroom)
+ skb2 = skb_copy_expand(skb, DM_TX_OVERHEAD, newtailroom,
+ flags);
+ else if (skb_headroom(skb) < DM_TX_OVERHEAD)
+ skb2 = skb_copy_expand(skb, DM_TX_OVERHEAD, 0, flags);
+ else
+ skb2 = skb_copy_expand(skb, 0, newtailroom, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (!skb)
+ return NULL;
+ }
+
+ /* add 2 bytes header which is data[0], data[1]
+ * with extra 2 bytes bulkout len
+ */
+ __skb_push(skb, DM_TX_OVERHEAD);
+
+ /* add 1, 2, or 3 bytes for tailer
+ * with different variate bulkout len
+ */
+ if (newtailroom)
+ __skb_put(skb, newtailroom);
+
+ /* add 2 bytes in length if a multiple of packet size */
+ len += fulladd_len;
+
+ skb->data[0] = len;
+ skb->data[1] = len >> 8;
+
+ return skb;
+}
+
+static void dm9620_status(struct usbnet *dev, struct urb *urb)
+{
+ int link;
+ u8 *buf;
+
+ /* format:
+ * b0: net status
+ * b1: tx status 1
+ * b2: tx status 2
+ * b3: rx status
+ * b4: rx overflow
+ * b5: rx count
+ * b6: tx count
+ * b7: gpr
+ */
+ if (urb->actual_length < 8)
+ return;
+
+ buf = urb->transfer_buffer;
+
+ link = !!(buf[0] & 0x40);
+ if (netif_carrier_ok(dev->net) != link) {
+ usbnet_link_change(dev, link, 1);
+ netdev_dbg(dev->net, "Link Status is: %d\n", link);
+ }
+}
+
+static int dm9620_link_reset(struct usbnet *dev)
+{
+ struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+
+ mii_check_media(&dev->mii, 1, 1);
+ mii_ethtool_gset(&dev->mii, &ecmd);
+ dm_write_reg(dev, DM_USB_CTRL, DM_USB_EP3ACK);
+
+ netdev_dbg(dev->net, "link_reset() speed: %u duplex: %d\n",
+ ethtool_cmd_speed(&ecmd), ecmd.duplex);
+
+ return 0;
+}
+
+static const struct driver_info dm9620_info = {
+ .description = "Davicom DM9620 USB Ethernet",
+ .flags = FLAG_ETHER | FLAG_LINK_INTR,
+ .bind = dm9620_bind,
+ .rx_fixup = dm9620_rx_fixup,
+ .tx_fixup = dm9620_tx_fixup,
+ .status = dm9620_status,
+ .link_reset = dm9620_link_reset,
+ .reset = dm9620_link_reset,
+ .unbind = dm9620_unbind,
+};
+
+static const struct usb_device_id products[] = {
+ {
+ USB_DEVICE(VID_DAVICOM, PID_DM9620), /* dm9620 */
+ .driver_info = (unsigned long)&dm9620_info,
+ },
+ {
+ USB_DEVICE(VID_DAVICOM, PID_DM9621), /* dm9621 */
+ .driver_info = (unsigned long)&dm9620_info,
+ },
+ {
+ USB_DEVICE(VID_DAVICOM, PID_DM9622), /* dm9622 */
+ .driver_info = (unsigned long)&dm9620_info,
+ },
+ {
+ USB_DEVICE(VID_DAVICOM, PID_DM9620A), /* dm9620a */
+ .driver_info = (unsigned long)&dm9620_info,
+ },
+ {
+ USB_DEVICE(VID_DAVICOM, PID_DM9621A), /* dm9621a */
+ .driver_info = (unsigned long)&dm9620_info,
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver dm9620_driver = {
+ .name = "dm9620",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+ .disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(dm9620_driver);
+
+MODULE_AUTHOR("Peter Korsgaard <jac...@sunsite.dk>");
+MODULE_DESCRIPTION("Davicom DM9620 USB 2.0 ethernet devices");
+MODULE_LICENSE("GPL");
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
