Hi On Fri, Jun 28, 2013 at 03:55:08PM +0300, Roger Quadros wrote: > On 06/28/2013 03:26 PM, Michael Trimarchi wrote: > > Hi > > > > On Fri, Jun 28, 2013 at 02:46:11PM +0300, Roger Quadros wrote: > >> On 06/28/2013 02:33 PM, Michael Trimarchi wrote: > >>> Hi Roger > >>> > >>> On Thu, Jun 27, 2013 at 11:07:11PM +0300, Ruslan Bilovol wrote: > >>>> On Thu, Jun 27, 2013 at 10:24 PM, Michael Trimarchi > >>>> <mich...@amarulasolutions.com> wrote: > >> > >>>> Do you have locks around this software workaround? > >>>> The patch I did against 3.4 linux kernel may be helpful for > >>>> you in such case: http://review.omapzoom.org/28515 > >>>> Another patch extends this WA for all OMAP4 SoCs: > >>>> http://review.omapzoom.org/31108 > >>> > >>> I'm testing using pm_test and stop to core (5ms and not 5 seconds) (usb > >>> suspend cycle are done correctly) so > >>> the problem could be: > >>> > >>> 1) SAR usb context restore. I have applied the SAR workaround but the > >>> core doesn't go in full retantion > >>> could be it a problem? > >> > >> If core doesn't go in to OFF then SAR will not come into play. Are you > >> still affected by the > >> issue if OFF mode is disabled? If yes then it probably is not related to > >> SAR. > >> > > > > I don't go in full retantion for FSUSB now > > > > [ 36.317413] PD_CORE curr=ON prev=ON logic=ON > > [ 36.317413] PD_L3_INIT curr=ON prev=ON logic=ON > > [ 36.317413] CD_L3_INIT mode=SW_SLEEP activity=0x2100 > > [ 36.317413] FSUSB mode=DISABLED stbyst=STBY idlest=TRANSITION > > [ 36.317413] Powerdomain (core_pwrdm) didn't enter target state 1 Vs > > achieved state 3. current state 3 > > [ 36.317413] Powerdomain (l3init_pwrdm) didn't enter target state 1 Vs > > achieved state 3. current state 3 > > > > This with enable_off_mode equal to 1 and usb stuck > > > > but if I switch to enable_off_mode 0 (debug file), it works. So the problem > > seems somewhere there. > > OK. Looks like the FSUSB module is stuck in transition. This can happen if > the bootloader > hasn't improperly managed the FSUSB clock. > > Can you apply the below patch to your bootloader and make sure FSUSB module > is OFF at boot. > > Let's see how it behaves with FSUSB out of the picture.
I was having already in the queue. Not was testing because the system is very complicated with boot security. BTW now I have fixed the retantion and change suspend state of REGEN1 for a shutdown problem. So now the system can suspend perfectly but the problem is still there. I have done a very good step forward ;) anyway (was planned to test the new version of bootloader) Michael > > cheers, > -roger > > From 0e42d3643d531daabd086f7ee451fdda8f22e72a Mon Sep 17 00:00:00 2001 > From: Tero Kristo <t-kri...@ti.com> > Date: Wed, 25 Apr 2012 06:05:20 +0000 > Subject: [PATCH] omap4: do not enable fs-usb module > > If this is done in the bootloader, the FS-USB will later be stuck into > intransition state, which will prevent the device from entering idle. > > Signed-off-by: Tero Kristo <t-kri...@ti.com> > --- > arch/arm/cpu/armv7/omap4/clocks.c | 2 -- > 1 files changed, 0 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/cpu/armv7/omap4/clocks.c > b/arch/arm/cpu/armv7/omap4/clocks.c > index e2189f7..2802559 100644 > --- a/arch/arm/cpu/armv7/omap4/clocks.c > +++ b/arch/arm/cpu/armv7/omap4/clocks.c > @@ -355,7 +355,6 @@ void enable_basic_clocks(void) > &prcm->cm_l4per_gptimer2_clkctrl, > &prcm->cm_wkup_wdtimer2_clkctrl, > &prcm->cm_l4per_uart3_clkctrl, > - &prcm->cm_l3init_fsusb_clkctrl, > &prcm->cm_l3init_hsusbhost_clkctrl, > 0 > }; > @@ -482,7 +481,6 @@ void enable_non_essential_clocks(void) > &prcm->cm_dss_dss_clkctrl, > &prcm->cm_sgx_sgx_clkctrl, > &prcm->cm_l3init_hsusbhost_clkctrl, > - &prcm->cm_l3init_fsusb_clkctrl, > 0 > }; > > -- > 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
