This patch introduces support of DMA SG if the USB host controller which usbnet device is attached to is capable of building packet from discontinuous buffers.
The patch supports passing the skb fragment buffers to usb stack directly via urb->sg. Cc: Eric Dumazet <eric.duma...@gmail.com> Cc: Ben Hutchings <bhutchi...@solarflare.com> Cc: Grant Grundler <grund...@google.com> Cc: Freddy Xin <fre...@asix.com.tw> Cc: Oliver Neukum <oneu...@suse.de> Cc: Alan Stern <st...@rowland.harvard.edu> Signed-off-by: Ming Lei <ming....@canonical.com> --- drivers/net/usb/usbnet.c | 38 ++++++++++++++++++++++++++++++++++++-- include/linux/usb/usbnet.h | 1 + 2 files changed, 37 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index e4811d7..51753b3 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1232,6 +1232,37 @@ EXPORT_SYMBOL_GPL(usbnet_tx_timeout); /*-------------------------------------------------------------------------*/ +static int build_dma_sg(const struct sk_buff *skb, struct urb *urb) +{ + unsigned num_sgs, total_len = 0; + int i, s = 0; + + num_sgs = skb_shinfo(skb)->nr_frags + 1; + if (num_sgs == 1) + return 0; + + urb->sg = kmalloc(num_sgs * sizeof(struct scatterlist), GFP_ATOMIC); + if (!urb->sg) + return -ENOMEM; + + urb->num_sgs = num_sgs; + sg_init_table(urb->sg, urb->num_sgs); + + sg_set_buf(&urb->sg[s++], skb->data, skb_headlen(skb)); + total_len += skb_headlen(skb); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + struct skb_frag_struct *f = &skb_shinfo(skb)->frags[i]; + + total_len += skb_frag_size(f); + sg_set_page(&urb->sg[i + s], f->page.p, f->size, + f->page_offset); + } + urb->transfer_buffer_length = total_len; + + return 1; +} + netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, struct net_device *net) { @@ -1258,7 +1289,6 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, goto drop; } } - length = skb->len; if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) { netif_dbg(dev, tx_err, dev->net, "no urb\n"); @@ -1268,10 +1298,14 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, entry = (struct skb_data *) skb->cb; entry->urb = urb; entry->dev = dev; - entry->length = length; usb_fill_bulk_urb (urb, dev->udev, dev->out, skb->data, skb->len, tx_complete, skb); + if (dev->can_dma_sg) { + if (build_dma_sg(skb, urb) < 0) + goto drop; + } + entry->length = length = urb->transfer_buffer_length; /* don't assume the hardware handles USB_ZERO_PACKET * NOTE: strictly conforming cdc-ether devices should expect diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 8fbc008..9cb2fe8 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -35,6 +35,7 @@ struct usbnet { unsigned char suspend_count; unsigned char pkt_cnt, pkt_err; unsigned short rx_qlen, tx_qlen; + unsigned can_dma_sg:1; /* i/o info: pipes etc */ unsigned in, out; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html