On Sat, Aug 03, 2013 at 09:32:00AM -0700, Scott Alfter wrote: > I have a Garmin USB ANT stick that shows up in lsusb as the following: > > Bus 009 Device 002: ID 0fcf:1008 Dynastream Innovations, Inc. Mini stick > Suunto > > It's a wireless serial device that talks to Garmin's GPS watches so you can > transfer data into and out of the watch. I can get it working with the > following command: > > modprobe usbserial vendor=0x0fcf product=0x100 > > dmesg spits out this information: > > [751657.368773] usbcore: registered new interface driver usbserial > [751657.368794] usbcore: registered new interface driver usbserial_generic > [751657.368803] usbserial: USB Serial support registered for generic > [751657.368823] usbserial_generic 9-1:1.0: The "generic" usb-serial driver is > only for testing and one-off prototypes. > [751657.368825] usbserial_generic 9-1:1.0: Tell linux-usb@vger.kernel.org to > add your device to a proper driver. > [751657.368826] usbserial_generic 9-1:1.0: generic converter detected > [751657.370262] usb 9-1: generic converter now attached to ttyUSB0 > > The module won't load without the vendor and product parameters, which also > means it won't auto-load. Is there more information you need to add this > device to the kernel so it will auto-load?
There is a new driver in the 3.11-rc3 kernel release for this device, called "suunto". It will be in the final 3.11 release in a few weeks, so no need to do anything special, when you upgrade to that release, it will auto-load properly. Hope this helps, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html