The chip type distinction is getting more and more relevant and
complicating, so always print the chip type.
Printing a name string is also much better than just printing an
internal index number.
Signed-off-by: Frank Schäfer <fschaefer....@googlemail.com>
---
drivers/usb/serial/pl2303.c | 15 ++++++++++-----
1 Datei geändert, 10 Zeilen hinzugefügt(+), 5 Zeilen entfernt(-)
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 7efb39c..5ca1443 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -177,6 +177,7 @@ static int pl2303_startup(struct usb_serial *serial)
{
struct pl2303_serial_private *spriv;
enum pl2303_type type = type_0;
+ char *type_str = "unknown (treating as type_0)";
unsigned char *buf;
spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
@@ -189,14 +190,18 @@ static int pl2303_startup(struct usb_serial *serial)
return -ENOMEM;
}
- if (serial->dev->descriptor.bDeviceClass == 0x02)
+ if (serial->dev->descriptor.bDeviceClass == 0x02) {
type = type_0;
- else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
+ type_str = "type_0";
+ } else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) {
type = HX;
- else if (serial->dev->descriptor.bDeviceClass == 0x00
- || serial->dev->descriptor.bDeviceClass == 0xFF)
+ type_str = "X/HX";
+ } else if (serial->dev->descriptor.bDeviceClass == 0x00
+ || serial->dev->descriptor.bDeviceClass == 0xFF) {
type = type_1;
- dev_dbg(&serial->interface->dev, "device type: %d\n", type);
+ type_str = "type_1";
+ }
+ dev_info(&serial->interface->dev, "device type: %s\n", type_str);
spriv->type = type;
usb_set_serial_data(serial, spriv);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
