+ linux-omap, Benoit On Thu, Aug 15, 2013 at 05:21:49PM +0200, Sebastian Andrzej Siewior wrote: > This relfects the code and dts requires changes due to recent .dts > binding updates: > - use mg prefix for the Metor Graphics specific attributes > - use power in mA not in mA/2 as specifed in the USB2.0 specification > > Signed-off-by: Sebastian Andrzej Siewior <bige...@linutronix.de>
hope this can go in during the -rc cycle
Acked-by: Felipe Balbi <ba...@ti.com>
> ---
> arch/arm/boot/dts/am335x-bone.dts | 2 +-
> arch/arm/boot/dts/am335x-evm.dts | 6 +++---
> arch/arm/boot/dts/am335x-evmsk.dts | 2 +-
> arch/arm/boot/dts/am33xx.dtsi | 26 +++++++++++++-------------
> drivers/usb/musb/musb_dsps.c | 11 ++++++-----
> 5 files changed, 24 insertions(+), 23 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am335x-bone.dts
> b/arch/arm/boot/dts/am335x-bone.dts
> index a8907b5..e8447a7 100644
> --- a/arch/arm/boot/dts/am335x-bone.dts
> +++ b/arch/arm/boot/dts/am335x-bone.dts
> @@ -127,7 +127,7 @@
> status = "okay";
> };
>
> - phy@47401300 {
> + usb-phy@47401300 {
> status = "okay";
> };
>
> diff --git a/arch/arm/boot/dts/am335x-evm.dts
> b/arch/arm/boot/dts/am335x-evm.dts
> index c26c16c..648a67e 100644
> --- a/arch/arm/boot/dts/am335x-evm.dts
> +++ b/arch/arm/boot/dts/am335x-evm.dts
> @@ -178,11 +178,11 @@
> status = "okay";
> };
>
> - phy@47401300 {
> + usb-phy@47401300 {
> status = "okay";
> };
>
> - phy@47401b00 {
> + usb-phy@47401b00 {
> status = "okay";
> };
>
> @@ -194,7 +194,7 @@
> status = "okay";
> };
>
> - dma@07402000 {
> + dma-controller@07402000 {
> status = "okay";
> };
> };
> diff --git a/arch/arm/boot/dts/am335x-evmsk.dts
> b/arch/arm/boot/dts/am335x-evmsk.dts
> index e92446c..a6c5033 100644
> --- a/arch/arm/boot/dts/am335x-evmsk.dts
> +++ b/arch/arm/boot/dts/am335x-evmsk.dts
> @@ -214,7 +214,7 @@
> status = "okay";
> };
>
> - phy@47401300 {
> + usb-phy@47401300 {
> status = "okay";
> };
>
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index a38f8d3..c57c6b8 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -354,7 +354,7 @@
> status = "disabled";
> };
>
> - usb0_phy: phy@47401300 {
> + usb0_phy: usb-phy@47401300 {
> compatible = "ti,am335x-usb-phy";
> reg = <0x47401300 0x100>;
> reg-names = "phy";
> @@ -377,11 +377,11 @@
> reg-names = "mc";
> interrupts = <18>;
> interrupt-names = "mc";
> - multipoint = <1>;
> - num-eps = <16>;
> - ram-bits = <12>;
> - port-mode = <3>;
> - power = <250>;
> + mg,multipoint = <1>;
> + mg,num-eps = <16>;
> + mg,ram-bits = <12>;
> + mg,port-mode = <3>;
> + mg,power = <500>;
> phys = <&usb0_phy>;
>
> dmas = <&cppi41dma 0 0 &cppi41dma 1 0
> @@ -409,7 +409,7 @@
> };
> };
>
> - usb1_phy: phy@47401b00 {
> + usb1_phy: usb-phy@47401b00 {
> compatible = "ti,am335x-usb-phy";
> reg = <0x47401b00 0x100>;
> reg-names = "phy";
> @@ -432,11 +432,11 @@
> reg-names = "mc";
> interrupts = <19>;
> interrupt-names = "mc";
> - multipoint = <1>;
> - num-eps = <16>;
> - ram-bits = <12>;
> - port-mode = <3>;
> - power = <250>;
> + mg,multipoint = <1>;
> + mg,num-eps = <16>;
> + mg,ram-bits = <12>;
> + mg,port-mode = <3>;
> + mg,power = <500>;
> phys = <&usb1_phy>;
>
> dmas = <&cppi41dma 15 0 &cppi41dma 16 0
> @@ -464,7 +464,7 @@
> };
> };
>
> - cppi41dma: dma@07402000 {
> + cppi41dma: dma-controller@07402000 {
> compatible = "ti,am3359-cppi41";
> reg = <0x47400000 0x1000
> 0x47402000 0x1000
> diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
> index 4ffbaac..7368577 100644
> --- a/drivers/usb/musb/musb_dsps.c
> +++ b/drivers/usb/musb/musb_dsps.c
> @@ -485,11 +485,12 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
> pdata.config = config;
> pdata.platform_ops = &dsps_ops;
>
> - config->num_eps = get_int_prop(child_node, "num-eps");
> - config->ram_bits = get_int_prop(child_node, "ram-bits");
> - pdata.mode = get_int_prop(child_node, "port-mode");
> - pdata.power = get_int_prop(child_node, "power");
> - config->multipoint = of_property_read_bool(child_node, "multipoint");
> + config->num_eps = get_int_prop(child_node, "mg,num-eps");
> + config->ram_bits = get_int_prop(child_node, "mg,ram-bits");
> + pdata.mode = get_int_prop(child_node, "mg,port-mode");
> + /* DT keeps this entry in mA, musb expects it as per USB spec */
> + pdata.power = get_int_prop(child_node, "mg,power") / 2;
> + config->multipoint = of_property_read_bool(child_node, "mg,multipoint");
>
> ret = platform_device_add_data(musb, &pdata, sizeof(pdata));
> if (ret) {
> --
> 1.8.4.rc2
>
--
balbi
signature.asc
Description: Digital signature
