Hi,
On Thursday 17 October 2013 10:08 PM, Felipe Balbi wrote:
> Hi,
>
> On Wed, Oct 16, 2013 at 01:24:11AM +0530, Kishon Vijay Abraham I wrote:
>> There can be systems which does not have a external usb_phy, so get
>> usb_phy only if dt data indicates the presence of PHY in the case of dt boot
>> or
>> if platform_data indicates the presence of PHY. Also remove checking if
>> return value is -ENXIO since it's now changed to always enable usb_phy layer.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
>
> I'm fine with this patch, but one comment below:
>
>> @@ -387,16 +388,49 @@ static int dwc3_probe(struct platform_device *pdev)
>> if (node) {
>> dwc->maximum_speed = of_usb_get_maximum_speed(node);
>>
>> - dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
>> - dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 1);
>> + count = of_count_phandle_with_args(node, "usb-phy", NULL);
>> + switch (count) {
>> + case 2:
>> + dwc->usb3_phy = devm_usb_get_phy_by_phandle(dev,
>> + "usb-phy", 1);
>> + if (IS_ERR(dwc->usb3_phy)) {
>> + dev_err(dev, "usb3 phy not found\n");
>> + return PTR_ERR(dwc->usb3_phy);
>> + }
>> + case 1:
>> + dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev,
>> + "usb-phy", 0);
>> + if (IS_ERR(dwc->usb2_phy)) {
>> + dev_err(dev, "usb2 phy not found\n");
>> + return PTR_ERR(dwc->usb2_phy);
>> + }
>> + break;
>> + default:
>> + dev_err(dev, "usb phy nodes not configured\n");
>> + }
>>
>> dwc->needs_fifo_resize = of_property_read_bool(node,
>> "tx-fifo-resize");
>> dwc->dr_mode = of_usb_get_dr_mode(node);
>> } else if (pdata) {
>> dwc->maximum_speed = pdata->maximum_speed;
>>
>> - dwc->usb2_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
>> - dwc->usb3_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB3);
>> + if (pdata->usb2_phy) {
>> + dwc->usb2_phy = devm_usb_get_phy(dev,
>> + USB_PHY_TYPE_USB2);
>> + if (IS_ERR(dwc->usb2_phy)) {
>> + dev_err(dev, "usb2 phy not found\n");
>> + return PTR_ERR(dwc->usb2_phy);
>> + }
>> + }
>> +
>> + if (pdata->usb3_phy) {
>> + dwc->usb3_phy = devm_usb_get_phy(dev,
>> + USB_PHY_TYPE_USB3);
>> + if (IS_ERR(dwc->usb3_phy)) {
>> + dev_err(dev, "usb3 phy not found\n");
>> + return PTR_ERR(dwc->usb3_phy);
>> + }
>> + }
>>
>> dwc->needs_fifo_resize = pdata->tx_fifo_resize;
>> dwc->dr_mode = pdata->dr_mode;
>> @@ -409,36 +443,6 @@ static int dwc3_probe(struct platform_device *pdev)
>> if (dwc->maximum_speed == USB_SPEED_UNKNOWN)
>> dwc->maximum_speed = USB_SPEED_SUPER;
>>
>> - if (IS_ERR(dwc->usb2_phy)) {
>> - ret = PTR_ERR(dwc->usb2_phy);
>> -
>> - /*
>> - * if -ENXIO is returned, it means PHY layer wasn't
>> - * enabled, so it makes no sense to return -EPROBE_DEFER
>> - * in that case, since no PHY driver will ever probe.
>> - */
>> - if (ret == -ENXIO)
>> - return ret;
>> -
>> - dev_err(dev, "no usb2 phy configured\n");
>> - return -EPROBE_DEFER;
>> - }
>> -
>> - if (IS_ERR(dwc->usb3_phy)) {
>> - ret = PTR_ERR(dwc->usb3_phy);
>> -
>> - /*
>> - * if -ENXIO is returned, it means PHY layer wasn't
>> - * enabled, so it makes no sense to return -EPROBE_DEFER
>> - * in that case, since no PHY driver will ever probe.
>> - */
>> - if (ret == -ENXIO)
>> - return ret;
>> -
>> - dev_err(dev, "no usb3 phy configured\n");
>> - return -EPROBE_DEFER;
>> - }
>
> the idea for doing the error checking here was actually to avoid
> duplicating it in all previous cases, as you did. Please keep the error
> checking here and you're good to go.
Ok.
>
>> -
>> dwc->xhci_resources[0].start = res->start;
>> dwc->xhci_resources[0].end = dwc->xhci_resources[0].start +
>> DWC3_XHCI_REGS_END;
>> diff --git a/drivers/usb/dwc3/platform_data.h
>> b/drivers/usb/dwc3/platform_data.h
>> index 7db34f0..49ffa6d 100644
>> --- a/drivers/usb/dwc3/platform_data.h
>> +++ b/drivers/usb/dwc3/platform_data.h
>> @@ -24,4 +24,6 @@ struct dwc3_platform_data {
>> enum usb_device_speed maximum_speed;
>> enum usb_dr_mode dr_mode;
>> bool tx_fifo_resize;
>> + bool usb2_phy;
>> + bool usb3_phy;
>
> This would look better as a quirks flag, then we could:
>
> unsigned long quirks;
> #define DWC3_QUIRK_NO_USB3_PHY BIT(0)
> #define DWC3_QUIRK_NO_USB2_PHY BIT(1)
>
> ...
>
> if (!test_bit(DWC3_QUIRK_NO_USB3_PHY), &dwc->quirks &&
> dwc->has_usb3_phy) {
> grab_usb3_phy();
> }
Ok.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
