Function xhci_read_64() is used to read 64bit xHC registers residing in MMIO. On 32bit systems, xHC registers need to be read with 32bit accesses by reading first the lower 32bits and then the higher 32bits.
Replace all calls to xhci_read_64() with calls to readq() and include asm-generic/io-64-nonatomic-lo-hi.h header file, so that if the system is not 64bit, readq() will read registers in 32bit chunks with low-high order. This is done to reduce code duplication since 64bit low-high read logic is already implemented and to take advantage of inherent "atomic" 64bit read operations on 64bit systems. Signed-off-by: Xenia Ragiadakou <burzalod...@gmail.com> --- drivers/usb/host/xhci-dbg.c | 6 +++--- drivers/usb/host/xhci-mem.c | 6 +++--- drivers/usb/host/xhci-ring.c | 6 +++--- drivers/usb/host/xhci.c | 12 ++++++------ drivers/usb/host/xhci.h | 10 ++-------- 5 files changed, 17 insertions(+), 23 deletions(-) diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index eb009a4..b016d38 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -203,12 +203,12 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num) addr, (unsigned int)temp); addr = &ir_set->erst_base; - temp_64 = xhci_read_64(xhci, addr); + temp_64 = readq(addr); xhci_dbg(xhci, " %p: ir_set.erst_base = @%08llx\n", addr, temp_64); addr = &ir_set->erst_dequeue; - temp_64 = xhci_read_64(xhci, addr); + temp_64 = readq(addr); xhci_dbg(xhci, " %p: ir_set.erst_dequeue = @%08llx\n", addr, temp_64); } @@ -412,7 +412,7 @@ void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci) { u64 val; - val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + val = readq(&xhci->op_regs->cmd_ring); xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = @%08x\n", lower_32_bits(val)); xhci_dbg(xhci, "// xHC command ring deq ptr high bits = @%08x\n", diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index bce4391..4b87026 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1958,7 +1958,7 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci) xhci_warn(xhci, "WARN something wrong with SW event ring " "dequeue ptr.\n"); /* Update HC event ring dequeue pointer */ - temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + temp = readq(&xhci->ir_set->erst_dequeue); temp &= ERST_PTR_MASK; /* Don't clear the EHB bit (which is RW1C) because * there might be more events to service. @@ -2312,7 +2312,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) (unsigned long long)xhci->cmd_ring->first_seg->dma); /* Set the address in the Command Ring Control register */ - val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + val_64 = readq(&xhci->op_regs->cmd_ring); val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | (xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) | xhci->cmd_ring->cycle_state; @@ -2396,7 +2396,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Set ERST base address for ir_set 0 = 0x%llx", (unsigned long long)xhci->erst.erst_dma_addr); - val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base); + val_64 = readq(&xhci->ir_set->erst_base); val_64 &= ERST_PTR_MASK; val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK); xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index bc46cce..339733b 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -313,7 +313,7 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) return 0; } - temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + temp_64 = readq(&xhci->op_regs->cmd_ring); if (!(temp_64 & CMD_RING_RUNNING)) { xhci_dbg(xhci, "Command ring had been stopped\n"); return 0; @@ -2871,7 +2871,7 @@ hw_died: /* Clear the event handler busy flag (RW1C); * the event ring should be empty. */ - temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + temp_64 = readq(&xhci->ir_set->erst_dequeue); xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue); spin_unlock(&xhci->lock); @@ -2885,7 +2885,7 @@ hw_died: */ while (xhci_handle_event(xhci) > 0) {} - temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + temp_64 = readq(&xhci->ir_set->erst_dequeue); /* If necessary, update the HW's version of the event ring deq ptr. */ if (event_ring_deq != xhci->event_ring->dequeue) { deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7630b9f..858e992 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -604,7 +604,7 @@ int xhci_run(struct usb_hcd *hcd) xhci_dbg(xhci, "Event ring:\n"); xhci_debug_ring(xhci, xhci->event_ring); xhci_dbg_ring_ptrs(xhci, xhci->event_ring); - temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + temp_64 = readq(&xhci->ir_set->erst_dequeue); temp_64 &= ~ERST_PTR_MASK; xhci_dbg_trace(xhci, trace_xhci_dbg_init, "ERST deq = 64'h%0lx", (long unsigned int) temp_64); @@ -749,11 +749,11 @@ static void xhci_save_registers(struct xhci_hcd *xhci) { xhci->s3.command = readl(&xhci->op_regs->command); xhci->s3.dev_nt = readl(&xhci->op_regs->dev_notification); - xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); + xhci->s3.dcbaa_ptr = readq(&xhci->op_regs->dcbaa_ptr); xhci->s3.config_reg = readl(&xhci->op_regs->config_reg); xhci->s3.erst_size = readl(&xhci->ir_set->erst_size); - xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base); - xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + xhci->s3.erst_base = readq(&xhci->ir_set->erst_base); + xhci->s3.erst_dequeue = readq(&xhci->ir_set->erst_dequeue); xhci->s3.irq_pending = readl(&xhci->ir_set->irq_pending); xhci->s3.irq_control = readl(&xhci->ir_set->irq_control); } @@ -776,7 +776,7 @@ static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) u64 val_64; /* step 2: initialize command ring buffer */ - val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + val_64 = readq(&xhci->op_regs->cmd_ring); val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, xhci->cmd_ring->dequeue) & @@ -3832,7 +3832,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) if (ret) { return ret; } - temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); + temp_64 = readq(&xhci->op_regs->dcbaa_ptr); xhci_dbg_trace(xhci, trace_xhci_dbg_address, "Op regs DCBAA ptr = %#016llx", temp_64); xhci_dbg_trace(xhci, trace_xhci_dbg_address, diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 402d874..5579b443 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -28,6 +28,8 @@ #include <linux/kernel.h> #include <linux/usb/hcd.h> +#include <asm-generic/io-64-nonatomic-lo-hi.h> + /* Code sharing between pci-quirks and xhci hcd */ #include "xhci-ext-caps.h" #include "pci-quirks.h" @@ -1604,14 +1606,6 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci) * xHCI implementations that do not support 64-bit address pointers will ignore * the high dword, and write order is irrelevant. */ -static inline u64 xhci_read_64(const struct xhci_hcd *xhci, - __le64 __iomem *regs) -{ - __u32 __iomem *ptr = (__u32 __iomem *) regs; - u64 val_lo = readl(ptr); - u64 val_hi = readl(ptr + 1); - return val_lo + (val_hi << 32); -} static inline void xhci_write_64(struct xhci_hcd *xhci, const u64 val, __le64 __iomem *regs) { -- 1.8.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html