On 12/06/2013 07:49 AM, Peter Chen wrote:
> On Thu, Dec 05, 2013 at 12:32:57PM +0100, Marc Kleine-Budde wrote:
>> This patch makes the controller register map ci_regs_nolpm and ci_regs_lpm as
>> "const". Further, as all offset fit into a single byte, the type is changed
>> from uintptr_t to u8.
>>
>> Signed-off-by: Marc Kleine-Budde <m...@pengutronix.de>
>> ---
>> drivers/usb/chipidea/core.c | 80
>> ++++++++++++++++++++++-----------------------
>> 1 file changed, 40 insertions(+), 40 deletions(-)
>>
>> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
>> index 02929ee..dae16b3 100644
>> --- a/drivers/usb/chipidea/core.c
>> +++ b/drivers/usb/chipidea/core.c
>> @@ -75,48 +75,48 @@
>> #include "otg.h"
>>
>> /* Controller register map */
>> -static uintptr_t ci_regs_nolpm[] = {
>> - [CAP_CAPLENGTH] = 0x000UL,
>> - [CAP_HCCPARAMS] = 0x008UL,
>> - [CAP_DCCPARAMS] = 0x024UL,
>> - [CAP_TESTMODE] = 0x038UL,
>> - [OP_USBCMD] = 0x000UL,
>> - [OP_USBSTS] = 0x004UL,
>> - [OP_USBINTR] = 0x008UL,
>> - [OP_DEVICEADDR] = 0x014UL,
>> - [OP_ENDPTLISTADDR] = 0x018UL,
>> - [OP_PORTSC] = 0x044UL,
>> - [OP_DEVLC] = 0x084UL,
>> - [OP_OTGSC] = 0x064UL,
>> - [OP_USBMODE] = 0x068UL,
>> - [OP_ENDPTSETUPSTAT] = 0x06CUL,
>> - [OP_ENDPTPRIME] = 0x070UL,
>> - [OP_ENDPTFLUSH] = 0x074UL,
>> - [OP_ENDPTSTAT] = 0x078UL,
>> - [OP_ENDPTCOMPLETE] = 0x07CUL,
>> - [OP_ENDPTCTRL] = 0x080UL,
>> +static const u8 ci_regs_nolpm[] = {
>> + [CAP_CAPLENGTH] = 0x00U,
>> + [CAP_HCCPARAMS] = 0x08U,
>> + [CAP_DCCPARAMS] = 0x24U,
>> + [CAP_TESTMODE] = 0x38U,
>> + [OP_USBCMD] = 0x00U,
>> + [OP_USBSTS] = 0x04U,
>> + [OP_USBINTR] = 0x08U,
>> + [OP_DEVICEADDR] = 0x14U,
>> + [OP_ENDPTLISTADDR] = 0x18U,
>> + [OP_PORTSC] = 0x44U,
>> + [OP_DEVLC] = 0x84U,
>> + [OP_OTGSC] = 0x64U,
>> + [OP_USBMODE] = 0x68U,
>> + [OP_ENDPTSETUPSTAT] = 0x6CU,
>> + [OP_ENDPTPRIME] = 0x70U,
>> + [OP_ENDPTFLUSH] = 0x74U,
>> + [OP_ENDPTSTAT] = 0x78U,
>> + [OP_ENDPTCOMPLETE] = 0x7CU,
>> + [OP_ENDPTCTRL] = 0x80U,
>> };
>>
>> -static uintptr_t ci_regs_lpm[] = {
>> - [CAP_CAPLENGTH] = 0x000UL,
>> - [CAP_HCCPARAMS] = 0x008UL,
>> - [CAP_DCCPARAMS] = 0x024UL,
>> - [CAP_TESTMODE] = 0x0FCUL,
>> - [OP_USBCMD] = 0x000UL,
>> - [OP_USBSTS] = 0x004UL,
>> - [OP_USBINTR] = 0x008UL,
>> - [OP_DEVICEADDR] = 0x014UL,
>> - [OP_ENDPTLISTADDR] = 0x018UL,
>> - [OP_PORTSC] = 0x044UL,
>> - [OP_DEVLC] = 0x084UL,
>> - [OP_OTGSC] = 0x0C4UL,
>> - [OP_USBMODE] = 0x0C8UL,
>> - [OP_ENDPTSETUPSTAT] = 0x0D8UL,
>> - [OP_ENDPTPRIME] = 0x0DCUL,
>> - [OP_ENDPTFLUSH] = 0x0E0UL,
>> - [OP_ENDPTSTAT] = 0x0E4UL,
>> - [OP_ENDPTCOMPLETE] = 0x0E8UL,
>> - [OP_ENDPTCTRL] = 0x0ECUL,
>> +static const u8 ci_regs_lpm[] = {
>> + [CAP_CAPLENGTH] = 0x00U,
>> + [CAP_HCCPARAMS] = 0x08U,
>> + [CAP_DCCPARAMS] = 0x24U,
>> + [CAP_TESTMODE] = 0xFCU,
>> + [OP_USBCMD] = 0x00U,
>> + [OP_USBSTS] = 0x04U,
>> + [OP_USBINTR] = 0x08U,
>> + [OP_DEVICEADDR] = 0x14U,
>> + [OP_ENDPTLISTADDR] = 0x18U,
>> + [OP_PORTSC] = 0x44U,
>> + [OP_DEVLC] = 0x84U,
>> + [OP_OTGSC] = 0xC4U,
>> + [OP_USBMODE] = 0xC8U,
>> + [OP_ENDPTSETUPSTAT] = 0xD8U,
>> + [OP_ENDPTPRIME] = 0xDCU,
>> + [OP_ENDPTFLUSH] = 0xE0U,
>> + [OP_ENDPTSTAT] = 0xE4U,
>> + [OP_ENDPTCOMPLETE] = 0xE8U,
>> + [OP_ENDPTCTRL] = 0xECU,
>> };
>>
>
> Add "const" is a good fix, but I can't see much benefit of
> change uintptr_t to u8 except reduce the kernel data segment.
> Using uintprt_t make the code easier to read as the reader
> can know it stands for pointer.No, it's not a pointer, it's an offset that added to the address __iomem pointer later. And it should never be used directly, it only used to setup the regmap. Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
signature.asc
Description: OpenPGP digital signature
