Hi,
These patches add support for Tahvo USB transceiver and allow using both
host and peripheral modes on Nokia 770.
Tested (peripheral mode, host mode, vbus detection) with 3.12-rc7.
History:
v4: Register sysfs files with sysfs_create_group().
Rename "vbus_state" to "vbus".
Document the sysfs ABI.
Add missing clk disable to extcon registration error path.
Add missing extcon unregistration to probe error paths.
Move IRQ registration after PHY registration.
v3: http://marc.info/?l=linux-omap&m=137157527930908&w=2
Delete accidental #include <mach/usb.h> from patch 3.
Drop board file changes, already queued to linux-omap.
v2: http://marc.info/?l=linux-omap&m=137138976406242&w=2
Use extcon framework to trigger OTG driver mode changes.
v1: http://marc.info/?l=linux-omap&m=137081763029385&w=2
Earlier RFC versions:
http://marc.info/?l=linux-omap&m=136553710000679&w=2
http://marc.info/?l=linux-omap&m=136266725827698&w=2
Aaro Koskinen (4):
ARM: OMAP1: USB: move omap_usb_config to platform data
USB: OMAP1: add extcon to platform data
USB: OMAP1: OTG controller driver
USB: OMAP1: Tahvo USB transceiver driver
Documentation/ABI/testing/sysfs-platform-tahvo-usb | 16 +
arch/arm/mach-omap1/include/mach/usb.h | 38 +-
drivers/usb/phy/Kconfig | 25 ++
drivers/usb/phy/Makefile | 2 +
drivers/usb/phy/phy-omap-otg.c | 169 ++++++++
drivers/usb/phy/phy-tahvo.c | 461 +++++++++++++++++++++
include/linux/platform_data/usb-omap1.h | 53 +++
7 files changed, 727 insertions(+), 37 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-platform-tahvo-usb
create mode 100644 drivers/usb/phy/phy-omap-otg.c
create mode 100644 drivers/usb/phy/phy-tahvo.c
create mode 100644 include/linux/platform_data/usb-omap1.h
--
1.8.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
