Hi Benoît,
On Tue, 3 Dec 2013, Roger Quadros wrote:
> Without this, the USB devices are sometimes not detected on OMAP4 Panda
> with u-boot v2013.10.
>
> Unlike what the comment states, errata i660 does not state that we
> can't RESET the USB host module. Instead it states that RESET is the
> only way to recover from a deadlock situation.
>
> RESET ensures that the module is in a known good state irrespective
> of what bootloader does with the module, so it must be done at boot.
>
> Reported-by: Tomi Valkeinen <tomi.valkei...@ti.com>
> Signed-off-by: Roger Quadros <rog...@ti.com>
Acked-by: Paul Walmsley <p...@pwsan.com>
Will you pick this up for the -rc series, or do you want me or Tony to?
Roger writes that this one's pretty important.
- Paul
> ---
> arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 12 ++----------
> arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 13 +++----------
> 2 files changed, 5 insertions(+), 20 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> index 1e5b12c..3318cae9 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> @@ -2937,7 +2937,7 @@ static struct omap_hwmod_class_sysconfig
> omap44xx_usb_host_hs_sysc = {
> .sysc_offs = 0x0010,
> .syss_offs = 0x0014,
> .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
> - SYSC_HAS_SOFTRESET),
> + SYSC_HAS_SOFTRESET | SYSC_HAS_RESET_STATUS),
> .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
> SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
> MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
> @@ -3001,15 +3001,7 @@ static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
> * hence HWMOD_SWSUP_MSTANDBY
> */
>
> - /*
> - * During system boot; If the hwmod framework resets the module
> - * the module will have smart idle settings; which can lead to deadlock
> - * (above Errata Id:i660); so, dont reset the module during boot;
> - * Use HWMOD_INIT_NO_RESET.
> - */
> -
> - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
> - HWMOD_INIT_NO_RESET,
> + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
> };
>
> /*
> diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
> b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
> index 9e08d69..e297d62 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
> @@ -1544,7 +1544,8 @@ static struct omap_hwmod_class_sysconfig
> omap54xx_usb_host_hs_sysc = {
> .rev_offs = 0x0000,
> .sysc_offs = 0x0010,
> .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
> - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
> + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
> + SYSC_HAS_RESET_STATUS),
> .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
> SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
> MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
> @@ -1598,15 +1599,7 @@ static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
> * hence HWMOD_SWSUP_MSTANDBY
> */
>
> - /*
> - * During system boot; If the hwmod framework resets the module
> - * the module will have smart idle settings; which can lead to deadlock
> - * (above Errata Id:i660); so, dont reset the module during boot;
> - * Use HWMOD_INIT_NO_RESET.
> - */
> -
> - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
> - HWMOD_INIT_NO_RESET,
> + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
> .main_clk = "l3init_60m_fclk",
> .prcm = {
> .omap4 = {
> --
> 1.8.3.2
>
- Paul
