From: Takashi Iwai <[email protected]> It makes easier for debugging some hardware specific issues.
Note that this option won't override the value to be set. That is, you can turn quirks on by this option but cannot turn them off if set by the driver. Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sarah Sharp <[email protected]> --- drivers/usb/host/xhci.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index d68ec1aa473d..6bc966cfb60e 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -40,6 +40,10 @@ static int link_quirk; module_param(link_quirk, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB"); +static unsigned int quirks; +module_param(quirks, uint, S_IRUGO); +MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default"); + /* TODO: copied from ehci-hcd.c - can this be refactored? */ /* * xhci_handshake - spin reading hc until handshake completes or fails @@ -4770,6 +4774,8 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) xhci->hcc_params = readl(&xhci->cap_regs->hcc_params); xhci_print_registers(xhci); + xhci->quirks = quirks; + get_quirks(dev, xhci); /* In xhci controllers which follow xhci 1.0 spec gives a spurious -- 1.8.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
