On 01/08/2014 04:10 PM, Arnd Bergmann wrote:
> On Wednesday 08 January 2014 15:57:19 Roger Quadros wrote:
>> It is a clock gate defined like so in the DT clock data
>>
>> on OMAP4
>> init_60m_fclk: init_60m_fclk {
>> #clock-cells = <0>;
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_usb_m2_ck>;
>> reg = <0x0104>;
>> ti,dividers = <1>, <8>;
>> };
>>
>> on OMAP5
>> l3init_60m_fclk: l3init_60m_fclk {
>> #clock-cells = <0>;
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_usb_m2_ck>;
>> reg = <0x0104>;
>> ti,dividers = <1>, <8>;
>> };
>>
>> So you can see that it is the same thing with a different name.
>
> Right, but init_60m_fclk is the name of the clock output of the
> divider here, which is /not/ what you should put in the "clock-names"
> property of the consumer. The clock input name should reflect what
> the clock is used for instead.
Ah, now I get it. :). I agree that the name should reflect the function.
Looking more closely, the driver doesn't enable/disable the init_60m_fclk but
just
uses it to configure the parent of utmi_p1_gfclk which is a clock input to the
USB module.
Based on this I would call it "refclk_int" for internal reference clock.
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
