Except for RTL_VER_01, replace loading the MAC address from PLA_IDR
with from PLA_BACKUP. The default MAC address may be modified by
the other OS, so the PLA_IDR may be not the default MAC address.
The data in the PLA_BACKUP address of the RTL_VER_01 may be destoryed,
so load MAC address from PLA_IDR for RTL_VER_01.
Signed-off-by: Hayes Wang <hayesw...@realtek.com>
---
drivers/net/usb/r8152.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 4888e4f..3847c35 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -889,11 +889,26 @@ int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg,
gfp_t mem_flags);
static inline void set_ethernet_addr(struct r8152 *tp)
{
struct net_device *dev = tp->netdev;
+ int ret;
u8 node_id[8] = {0};
- if (pla_ocp_read(tp, PLA_IDR, sizeof(node_id), node_id) < 0)
+ if (tp->version == RTL_VER_01)
+ ret = pla_ocp_read(tp, PLA_IDR, sizeof(node_id), node_id);
+ else
+ ret = pla_ocp_read(tp, PLA_BACKUP, sizeof(node_id), node_id);
+
+ if (ret < 0) {
netif_notice(tp, probe, dev, "inet addr fail\n");
- else {
+ } else {
+ if (tp->version != RTL_VER_01) {
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR,
+ CRWECR_CONFIG);
+ pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES,
+ sizeof(node_id), node_id);
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR,
+ CRWECR_NORAML);
+ }
+
memcpy(dev->dev_addr, node_id, dev->addr_len);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
}
--
1.8.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
