Hi,

On Thu, Mar 13, 2014 at 06:40:55PM +0530, Suresh Gupta wrote:
> Attached is a small fix for the fsl usb gadget driver. This fix the
> driver in a way that the usb device will be only "pulled up" on requests
> like other usb gadget drivers do.
> This is necessary, because the device information is not always
> available until an application is up and running which provides this
> datas.
> 
> Signed-off-by: Stefani Seibold <stef...@seibold.net>
> Signed-off-by: Suresh Gupta <suresh.gu...@freescale.com>
> ---
>  drivers/usb/gadget/fsl_udc_core.c | 38 +++++++++++++++++++++-----------------
>  1 file changed, 21 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/usb/gadget/fsl_udc_core.c 
> b/drivers/usb/gadget/fsl_udc_core.c
> index 35cb972..9a93727 100644
> --- a/drivers/usb/gadget/fsl_udc_core.c
> +++ b/drivers/usb/gadget/fsl_udc_core.c
> @@ -153,6 +153,21 @@ static inline void fsl_set_accessors(struct 
> fsl_usb2_platform_data *pdata) {}
>  /********************************************************************
>   *   Internal Used Function
>  ********************************************************************/
> +static int can_pullup(struct fsl_udc *udc)
> +{
> +     return udc->driver && udc->softconnect && udc->vbus_active;
> +}
> +
> +static void set_pullup(struct fsl_udc *udc)
> +{
> +     if (can_pullup(udc))
> +             fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
> +                             &dr_regs->usbcmd);
> +     else
> +             fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP),
> +                             &dr_regs->usbcmd);
> +}

why is this a "fix", you just re-factored some code into set_pullup().

-- 
balbi

Attachment: signature.asc
Description: Digital signature

Reply via email to