On Tue, Apr 01, 2014 at 01:37:27PM +0300, Roger Quadros wrote: > The USB3 PHY driver (ti-pipe3) was updated so that the relevant > clock phandles are expected in the DT node. > Provide the necessary clocks. > > Reported-by: Kishon Vijay Abraham I <kis...@ti.com> > Signed-off-by: Roger Quadros <rog...@ti.com>
Great!!! Acked-by: Felipe Balbi <ba...@ti.com> > --- > arch/arm/boot/dts/omap5.dtsi | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi > index 757f0b9..4df1e7a 100644 > --- a/arch/arm/boot/dts/omap5.dtsi > +++ b/arch/arm/boot/dts/omap5.dtsi > @@ -794,6 +794,12 @@ > <0x4a084c00 0x40>; > reg-names = "phy_rx", "phy_tx", "pll_ctrl"; > ctrl-module = <&omap_control_usb3phy>; > + clocks = <&usb_phy_cm_clk32k>, > + <&sys_clkin>, > + <&usb_otg_ss_refclk960m>; > + clock-names = "wkupclk", > + "sysclk", > + "refclk"; > #phy-cells = <0>; > }; > }; > -- > 1.8.3.2 > -- balbi
signature.asc
Description: Digital signature