For internal PHY (like UTMI), the phy clock may from internal pll,
it is on/off on the fly, the access PORTSC.PTS will hang without
phy clock. So, the usb_phy_init which will open phy clock needs to
be called before hw_phymode_configure.
See: http://marc.info/?l=linux-arm-kernel&m=139350618732108&w=2
For external PHY (like ulpi), it needs to configure portsc.pts before
visit viewport, or the viewport can't be visited. so phy_phymode_configure
needs to be called before usb_phy_init.
See: cd0b42c2a6d2a74244f0053f8960f5dad5842278
It may not the best solution, but it can work for all situations.
Cc: Sascha Hauer <s.ha...@pengutronix.de>
Cc: Chris Ruehl <chris.ru...@gtsys.com.hk>
Cc: shc_w...@mail.ru
Cc: de...@eukrea.com
Cc: feste...@gmail.com
Signed-off-by: Peter Chen <peter.c...@freescale.com>
---
drivers/usb/chipidea/core.c | 37 ++++++++++++++++++++++++++++++++++---
1 files changed, 34 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index ca6831c..1cd5d0b 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -277,6 +277,39 @@ static void hw_phymode_configure(struct ci_hdrc *ci)
}
/**
+ * ci_usb_phy_init: initialize phy according to different phy type
+ * @ci: the controller
+ *
+ * This function returns an error code if usb_phy_init has failed
+ */
+static int ci_usb_phy_init(struct ci_hdrc *ci)
+{
+ int ret;
+
+ switch (ci->platdata->phy_mode) {
+ case USBPHY_INTERFACE_MODE_UTMI:
+ case USBPHY_INTERFACE_MODE_UTMIW:
+ case USBPHY_INTERFACE_MODE_HSIC:
+ ret = usb_phy_init(ci->transceiver);
+ if (ret)
+ return ret;
+ hw_phymode_configure(ci);
+ break;
+ case USBPHY_INTERFACE_MODE_ULPI:
+ case USBPHY_INTERFACE_MODE_SERIAL:
+ hw_phymode_configure(ci);
+ ret = usb_phy_init(ci->transceiver);
+ if (ret)
+ return ret;
+ break;
+ default:
+ ret = usb_phy_init(ci->transceiver);
+ }
+
+ return ret;
+}
+
+/**
* hw_device_reset: resets chip (execute without interruption)
* @ci: the controller
*
@@ -543,8 +576,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
return -ENODEV;
}
- hw_phymode_configure(ci);
-
if (ci->platdata->phy)
ci->transceiver = ci->platdata->phy;
else
@@ -564,7 +595,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
return -EPROBE_DEFER;
}
- ret = usb_phy_init(ci->transceiver);
+ ret = ci_usb_phy_init(ci);
if (ret) {
dev_err(dev, "unable to init phy: %d\n", ret);
return ret;
--
1.7.8
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
