Preparing for more supported standard device layouts. Keeping
the matching macros unchanged to avoid breaking stable
backporting of new device additions.

Signed-off-by: Bjørn Mork <bj...@mork.no>
---
 drivers/usb/serial/qcserial.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 7ed681a714a5..23cc274727bc 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -22,8 +22,14 @@
 #define DRIVER_AUTHOR "Qualcomm Inc"
 #define DRIVER_DESC "Qualcomm USB Serial driver"
 
+/* standard device layouts supported by this driver */
+enum qcserial_layouts {
+       QCSERIAL_G2K = 0,       /* Gobi 2000 */
+       QCSERIAL_G1K = 1,       /* Gobi 1000 */
+};
+
 #define DEVICE_G1K(v, p) \
-       USB_DEVICE(v, p), .driver_info = 1
+       USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K
 
 static const struct usb_device_id id_table[] = {
        /* Gobi 1000 devices */
@@ -163,11 +169,8 @@ static int qcprobe(struct usb_serial *serial, const struct 
usb_device_id *id)
        int retval = -ENODEV;
        __u8 nintf;
        __u8 ifnum;
-       bool is_gobi1k = id->driver_info ? true : false;
        int altsetting = -1;
 
-       dev_dbg(dev, "Is Gobi 1000 = %d\n", is_gobi1k);
-
        nintf = serial->dev->actconfig->desc.bNumInterfaces;
        dev_dbg(dev, "Num Interfaces = %d\n", nintf);
        ifnum = intf->desc.bInterfaceNumber;
@@ -214,7 +217,8 @@ static int qcprobe(struct usb_serial *serial, const struct 
usb_device_id *id)
         * gets handled by other drivers.
         */
 
-       if (is_gobi1k) {
+       switch (id->driver_info) {
+       case QCSERIAL_G1K:
                /* Gobi 1K USB layout:
                 * 0: DM/DIAG (use libqcdm from ModemManager for communication)
                 * 1: serial port (doesn't respond)
@@ -228,7 +232,8 @@ static int qcprobe(struct usb_serial *serial, const struct 
usb_device_id *id)
                        dev_dbg(dev, "Modem port found\n");
                else
                        altsetting = -1;
-       } else {
+               break;
+       case QCSERIAL_G2K:
                /* Gobi 2K+ USB layout:
                 * 0: QMI/net
                 * 1: DM/DIAG (use libqcdm from ModemManager for communication)
@@ -255,6 +260,11 @@ static int qcprobe(struct usb_serial *serial, const struct 
usb_device_id *id)
                        dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n");
                        break;
                }
+               break;
+       default:
+               dev_err(dev, "unsupported device layout type: %lu\n",
+                       id->driver_info);
+               break;
        }
 
 done:
-- 
2.0.0.rc0

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to