On Tue, 2014-05-06 at 19:39 +0400, Sergei Shtylyov wrote: > Hello. > > On 05/06/2014 02:23 AM, dingu...@altera.com wrote: > > > From: Dinh Nguyen <dingu...@altera.com> > > > Even though the IP supports Descriptor DMA mode, it does not support SPLIT > > transactions in this mode. Since the driver can get the Descriptor DMA mode > > support from hardware, the driver in its currently form cannot fully support > > LS/FS devices connected to a HS Hub when Descriptor DMA mode is enabled in > > the > > driver. Thus, we give the option to disable Descriptor DMA from device tree. > > > Signed-off-by: Dinh Nguyen <dingu...@altera.com> > > --- > > drivers/usb/dwc2/platform.c | 3 +++ > > 1 file changed, 3 insertions(+) > > > diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c > > index eaba547..cb2133c 100644 > > --- a/drivers/usb/dwc2/platform.c > > +++ b/drivers/usb/dwc2/platform.c > > @@ -123,6 +123,7 @@ static int dwc2_driver_probe(struct platform_device > > *dev) > > struct resource *res; > > int retval; > > int irq; > > + u32 prop; > > > > if (usb_disabled()) > > return -ENODEV; > > @@ -135,6 +136,8 @@ static int dwc2_driver_probe(struct platform_device > > *dev) > > dwc2_set_all_params(&defparams, -1); > > params = &defparams; > > } > > + if (!of_property_read_u32(dev->dev.of_node, "dma-desc-enable", &prop)) > > + defparams.dma_desc_enable = prop; > > You don't really need a helper local variable here, the variable > receiving > the property value won't be changed if there was an error retrieving it. >
Ah yes, you're right. Thanks for the review. Dinh > WBR, Sergei > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html