Hi everyone, This patchset adds support for the USB controllers found in the Allwinner A31.
While the design is similar to the earlier Allwinner SoCs that are already supported, a few details here and there change, like the fact that the PHYs now have one clock per phy, while it used to be only one for all the PHYs. Thanks, Maxime Boris BREZILLON (2): usb: ehci-platform: add optional reset controller retrieval ARM: sunxi: dt: add APP4-EVB1 board support Maxime Ripard (5): clk: sunxi: Implement A31 USB clock ARM: sun6i: Add the USB clocks to the DTSI. phy: usb: sunxi: Introduce Allwinner A31 USB PHY support usb: ohci-platform: Enable optional use of reset controller ARM: sun6i: dt: Add support for the USB controllers Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 + Documentation/devicetree/bindings/usb/usb-ohci.txt | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun6i-a31-app4-evb1.dts | 63 ++++++++++++++++ arch/arm/boot/dts/sun6i-a31.dtsi | 88 ++++++++++++++++++++++ drivers/clk/sunxi/clk-sunxi.c | 6 ++ drivers/phy/phy-sun4i-usb.c | 35 ++++++--- drivers/usb/host/ehci-platform.c | 25 +++++- drivers/usb/host/ohci-platform.c | 25 +++++- 9 files changed, 234 insertions(+), 11 deletions(-) create mode 100644 arch/arm/boot/dts/sun6i-a31-app4-evb1.dts -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html