Tony, This patch will need to be updated for IRQ crossbar changes.
I will send a revised version of just this patch based on crossbar changes [1] [1] - http://article.gmane.org/gmane.linux.documentation/23293 cheers, -roger On 05/05/2014 12:54 PM, Roger Quadros wrote: > Add nodes for the Super Speed USB controllers, omap-control-usb, > USB2 PHY and USB3 PHY devices. > > Remove ocp2scp1 address space from hwmod data as it is > now provided via device tree. > > CC: BenoƮt Cousson <bcous...@baylibre.com> > Reviewed-by: Felipe Balbi <ba...@ti.com> > Signed-off-by: Roger Quadros <rog...@ti.com> > --- > arch/arm/boot/dts/dra7.dtsi | 149 > ++++++++++++++++++++++++++++++ > arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 10 -- > 2 files changed, 149 insertions(+), 10 deletions(-) > > diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi > index 149b550..4535e54 100644 > --- a/arch/arm/boot/dts/dra7.dtsi > +++ b/arch/arm/boot/dts/dra7.dtsi > @@ -789,6 +789,155 @@ > dma-names = "tx0", "rx0"; > status = "disabled"; > }; > + > + omap_control_usb2phy1: control-phy@4a002300 { > + compatible = "ti,control-phy-usb2"; > + reg = <0x4a002300 0x4>; > + reg-names = "power"; > + }; > + > + omap_control_usb3phy1: control-phy@4a002370 { > + compatible = "ti,control-phy-pipe3"; > + reg = <0x4a002370 0x4>; > + reg-names = "power"; > + }; > + > + omap_control_usb2phy2: control-phy@0x4a002e74 { > + compatible = "ti,control-phy-usb2-dra7"; > + reg = <0x4a002e74 0x4>; > + reg-names = "power"; > + }; > + > + /* OCP2SCP1 */ > + ocp2scp@4a080000 { > + compatible = "ti,omap-ocp2scp"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + reg = <0x4a080000 0x20>; > + ti,hwmods = "ocp2scp1"; > + > + usb2_phy1: phy@4a084000 { > + compatible = "ti,omap-usb2"; > + reg = <0x4a084000 0x400>; > + ctrl-module = <&omap_control_usb2phy1>; > + clocks = <&usb_phy1_always_on_clk32k>, > + <&usb_otg_ss1_refclk960m>; > + clock-names = "wkupclk", > + "refclk"; > + #phy-cells = <0>; > + }; > + > + usb2_phy2: phy@4a085000 { > + compatible = "ti,omap-usb2"; > + reg = <0x4a085000 0x400>; > + ctrl-module = <&omap_control_usb2phy2>; > + clocks = <&usb_phy2_always_on_clk32k>, > + <&usb_otg_ss2_refclk960m>; > + clock-names = "wkupclk", > + "refclk"; > + #phy-cells = <0>; > + }; > + > + usb3_phy1: phy@4a084400 { > + compatible = "ti,omap-usb3"; > + reg = <0x4a084400 0x80>, > + <0x4a084800 0x64>, > + <0x4a084c00 0x40>; > + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; > + ctrl-module = <&omap_control_usb3phy1>; > + clocks = <&usb_phy3_always_on_clk32k>, > + <&sys_clkin1>, > + <&usb_otg_ss1_refclk960m>; > + clock-names = "wkupclk", > + "sysclk", > + "refclk"; > + #phy-cells = <0>; > + }; > + }; > + > + omap_dwc3_1@48880000 { > + compatible = "ti,dwc3"; > + ti,hwmods = "usb_otg_ss1"; > + reg = <0x48880000 0x10000>; > + interrupts = <0 77 4>; > + #address-cells = <1>; > + #size-cells = <1>; > + utmi-mode = <2>; > + ranges; > + usb1: usb@48890000 { > + compatible = "snps,dwc3"; > + reg = <0x48890000 0x17000>; > + interrupts = <0 76 4>; > + phys = <&usb2_phy1>, <&usb3_phy1>; > + phy-names = "usb2-phy", "usb3-phy"; > + tx-fifo-resize; > + maximum-speed = "super-speed"; > + dr_mode = "otg"; > + }; > + }; > + > + omap_dwc3_2@488c0000 { > + compatible = "ti,dwc3"; > + ti,hwmods = "usb_otg_ss2"; > + reg = <0x488c0000 0x10000>; > + interrupts = <0 92 4>; > + #address-cells = <1>; > + #size-cells = <1>; > + utmi-mode = <2>; > + ranges; > + usb2: usb@488d0000 { > + compatible = "snps,dwc3"; > + reg = <0x488d0000 0x17000>; > + interrupts = <0 78 4>; > + phys = <&usb2_phy2>; > + phy-names = "usb2-phy"; > + tx-fifo-resize; > + maximum-speed = "high-speed"; > + dr_mode = "otg"; > + }; > + }; > + > + /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ > + omap_dwc3_3@48900000 { > + compatible = "ti,dwc3"; > + ti,hwmods = "usb_otg_ss3"; > + reg = <0x48900000 0x10000>; > + /* interrupts = <0 TBD 4>; */ > + #address-cells = <1>; > + #size-cells = <1>; > + utmi-mode = <2>; > + ranges; > + status = "disabled"; > + usb3: usb@48910000 { > + compatible = "snps,dwc3"; > + reg = <0x48910000 0x17000>; > + /* interrupts = <0 93 4>; */ > + tx-fifo-resize; > + maximum-speed = "high-speed"; > + dr_mode = "otg"; > + }; > + }; > + > + omap_dwc3_4@48940000 { > + compatible = "ti,dwc3"; > + ti,hwmods = "usb_otg_ss4"; > + reg = <0x48940000 0x10000>; > + /* interrupts = <0 TBD 4>; */ > + #address-cells = <1>; > + #size-cells = <1>; > + utmi-mode = <2>; > + ranges; > + status = "disabled"; > + usb4: usb@48950000 { > + compatible = "snps,dwc3"; > + reg = <0x48950000 0x17000>; > + /* interrupts = <0 TBD 4>; */ > + tx-fifo-resize; > + maximum-speed = "high-speed"; > + dr_mode = "otg"; > + }; > + }; > }; > }; > > diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c > b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c > index 067d322..d6f9709 100644 > --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c > +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c > @@ -2330,21 +2330,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = { > .user = OCP_USER_MPU | OCP_USER_SDMA, > }; > > -static struct omap_hwmod_addr_space dra7xx_ocp2scp1_addrs[] = { > - { > - .pa_start = 0x4a080000, > - .pa_end = 0x4a08001f, > - .flags = ADDR_TYPE_RT > - }, > - { } > -}; > - > /* l4_cfg -> ocp2scp1 */ > static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp1 = { > .master = &dra7xx_l4_cfg_hwmod, > .slave = &dra7xx_ocp2scp1_hwmod, > .clk = "l4_root_clk_div", > - .addr = dra7xx_ocp2scp1_addrs, > .user = OCP_USER_MPU | OCP_USER_SDMA, > }; > > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html