The rr3_ftr function duplicates the in-kernel tracing logic, so remove
it.
This is step 1 of of removing the CONFIG_USB_DEBUG depandancy in this
driver.
Cc: Mauro Carvalho Chehab <m.che...@samsung.com>
Cc: Sean Young <s...@mess.org>
Cc: Hans Verkuil <hans.verk...@cisco.com>
Cc: Jonathan McCrohan <jmccro...@gmail.com>
Cc: James Hogan <james.ho...@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/media/rc/redrat3.c | 39 ++-------------------------------------
1 file changed, 2 insertions(+), 37 deletions(-)
diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index 47cd373e2295..610c15ef4ae6 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -76,12 +76,6 @@ static int debug;
dev_info(dev, fmt, ## __VA_ARGS__); \
} while (0)
-#define rr3_ftr(dev, fmt, ...) \
- do { \
- if (debug & RR3_DEBUG_FUNCTION_TRACE) \
- dev_info(dev, fmt, ## __VA_ARGS__); \
- } while (0)
-
/* bulk data transfer types */
#define RR3_ERROR 0x01
#define RR3_MOD_SIGNAL_IN 0x20
@@ -237,8 +231,6 @@ static void redrat3_issue_async(struct redrat3_dev *rr3)
{
int res;
- rr3_ftr(rr3->dev, "Entering %s\n", __func__);
-
res = usb_submit_urb(rr3->read_urb, GFP_ATOMIC);
if (res)
rr3_dbg(rr3->dev, "%s: receive request FAILED! "
@@ -377,8 +369,6 @@ static void redrat3_process_ir_data(struct redrat3_dev *rr3)
return;
}
- rr3_ftr(rr3->dev, "Entered %s\n", __func__);
-
dev = rr3->dev;
/* Make sure we reset the IR kfifo after a bit of inactivity */
@@ -464,8 +454,6 @@ static int redrat3_enable_detector(struct redrat3_dev *rr3)
struct device *dev = rr3->dev;
u8 ret;
- rr3_ftr(dev, "Entering %s\n", __func__);
-
ret = redrat3_send_cmd(RR3_RC_DET_ENABLE, rr3);
if (ret != 0)
dev_dbg(dev, "%s: unexpected ret of %d\n",
@@ -486,7 +474,6 @@ static int redrat3_enable_detector(struct redrat3_dev *rr3)
static inline void redrat3_delete(struct redrat3_dev *rr3,
struct usb_device *udev)
{
- rr3_ftr(rr3->dev, "%s cleaning up\n", __func__);
usb_kill_urb(rr3->read_urb);
usb_kill_urb(rr3->flash_urb);
usb_free_urb(rr3->read_urb);
@@ -535,8 +522,6 @@ static void redrat3_reset(struct redrat3_dev *rr3)
u8 *val;
int len = sizeof(u8);
- rr3_ftr(dev, "Entering %s\n", __func__);
-
rxpipe = usb_rcvctrlpipe(udev, 0);
txpipe = usb_sndctrlpipe(udev, 0);
@@ -572,8 +557,6 @@ static void redrat3_get_firmware_rev(struct redrat3_dev
*rr3)
int rc = 0;
char *buffer;
- rr3_ftr(rr3->dev, "Entering %s\n", __func__);
-
buffer = kzalloc(sizeof(char) * (RR3_FW_VERSION_LEN + 1), GFP_KERNEL);
if (!buffer) {
dev_err(rr3->dev, "Memory allocation failure\n");
@@ -591,7 +574,6 @@ static void redrat3_get_firmware_rev(struct redrat3_dev
*rr3)
dev_err(rr3->dev, "Problem fetching firmware ID\n");
kfree(buffer);
- rr3_ftr(rr3->dev, "Exiting %s\n", __func__);
}
static void redrat3_read_packet_start(struct redrat3_dev *rr3, unsigned len)
@@ -599,8 +581,6 @@ static void redrat3_read_packet_start(struct redrat3_dev
*rr3, unsigned len)
struct redrat3_header *header = rr3->bulk_in_buf;
unsigned pktlen, pkttype;
- rr3_ftr(rr3->dev, "Entering %s\n", __func__);
-
/* grab the Length and type of transfer */
pktlen = be16_to_cpu(header->length);
pkttype = be16_to_cpu(header->transfer_type);
@@ -637,8 +617,6 @@ static void redrat3_read_packet_continue(struct redrat3_dev
*rr3, unsigned len)
{
void *irdata = &rr3->irdata;
- rr3_ftr(rr3->dev, "Entering %s\n", __func__);
-
if (len + rr3->bytes_read > sizeof(rr3->irdata)) {
dev_warn(rr3->dev, "too much data for packet\n");
rr3->bytes_read = 0;
@@ -659,8 +637,6 @@ static int redrat3_get_ir_data(struct redrat3_dev *rr3,
unsigned len)
unsigned pkttype;
int ret = 0;
- rr3_ftr(dev, "Entering %s\n", __func__);
-
if (rr3->bytes_read == 0 && len >= sizeof(struct redrat3_header)) {
redrat3_read_packet_start(rr3, len);
} else if (rr3->bytes_read != 0) {
@@ -705,8 +681,6 @@ static void redrat3_handle_async(struct urb *urb)
return;
}
- rr3_ftr(rr3->dev, "Entering %s\n", __func__);
-
switch (urb->status) {
case 0:
ret = redrat3_get_ir_data(rr3, urb->actual_length);
@@ -764,8 +738,6 @@ static int redrat3_transmit_ir(struct rc_dev *rcdev,
unsigned *txbuf,
u8 curlencheck = 0;
unsigned i, sendbuf_len;
- rr3_ftr(dev, "Entering %s\n", __func__);
-
if (rr3->transmitting) {
dev_warn(dev, "%s: transmitter already in use\n", __func__);
return -EAGAIN;
@@ -957,8 +929,6 @@ static int redrat3_dev_probe(struct usb_interface *intf,
int pipe, i;
int retval = -ENOMEM;
- rr3_ftr(dev, "%s called\n", __func__);
-
uhi = intf->cur_altsetting;
/* find our bulk-in and bulk-out endpoints */
@@ -1074,7 +1044,6 @@ static int redrat3_dev_probe(struct usb_interface *intf,
/* we can register the device now, as it is ready */
usb_set_intfdata(intf, rr3);
- rr3_ftr(dev, "Exiting %s\n", __func__);
return 0;
led_free_error:
@@ -1093,8 +1062,6 @@ static void redrat3_dev_disconnect(struct usb_interface
*intf)
struct usb_device *udev = interface_to_usbdev(intf);
struct redrat3_dev *rr3 = usb_get_intfdata(intf);
- rr3_ftr(&intf->dev, "Entering %s\n", __func__);
-
if (!rr3)
return;
@@ -1103,14 +1070,12 @@ static void redrat3_dev_disconnect(struct usb_interface
*intf)
led_classdev_unregister(&rr3->led);
del_timer_sync(&rr3->rx_timeout);
redrat3_delete(rr3, udev);
-
- rr3_ftr(&intf->dev, "RedRat3 IR Transceiver now disconnected\n");
}
static int redrat3_dev_suspend(struct usb_interface *intf, pm_message_t
message)
{
struct redrat3_dev *rr3 = usb_get_intfdata(intf);
- rr3_ftr(rr3->dev, "suspend\n");
+
led_classdev_suspend(&rr3->led);
usb_kill_urb(rr3->read_urb);
usb_kill_urb(rr3->flash_urb);
@@ -1120,7 +1085,7 @@ static int redrat3_dev_suspend(struct usb_interface
*intf, pm_message_t message)
static int redrat3_dev_resume(struct usb_interface *intf)
{
struct redrat3_dev *rr3 = usb_get_intfdata(intf);
- rr3_ftr(rr3->dev, "resume\n");
+
if (usb_submit_urb(rr3->read_urb, GFP_ATOMIC))
return -EIO;
led_classdev_resume(&rr3->led);
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
