Hi, (2014/05/29 5:28), Greg Kroah-Hartman wrote: > On Wed, May 28, 2014 at 08:23:09PM +0900, Yoshihiro Shimoda wrote: >> The R-Car H2 and M2 SoCs come with an xHCI controller that requires >> some specific initializations related to the firmware downloading and >> some specific registers. This patch adds the support for this special >> configuration as an xHCI quirk executed during probe and start. >> >> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com> >> --- >> drivers/usb/host/Kconfig | 8 +++ >> drivers/usb/host/Makefile | 3 + >> drivers/usb/host/xhci-plat.c | 18 +++++ >> drivers/usb/host/xhci-rcar.c | 160 >> ++++++++++++++++++++++++++++++++++++++++++ >> drivers/usb/host/xhci-rcar.h | 27 +++++++ >> 5 files changed, 216 insertions(+) >> create mode 100644 drivers/usb/host/xhci-rcar.c >> create mode 100644 drivers/usb/host/xhci-rcar.h > > This doesn't apply cleanly to my tree, can you please refresh it and > resend?
Sure. Actually, this patch depends on the folloing additional patch: http://marc.info/?l=linux-usb&m=140025742005303&w=2 And, the additional patch needs to fix some things. So, I will fix it and submit these patches. Best regards, Yoshihiro Shimoda > thanks, > > greg k-h > -- Yoshihiro Shimoda EC No. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
