On Mon, May 26, 2014 at 02:52:34PM +0200, Daniel Mack wrote: > When a 0-length packet is received on the bus, desc->pd0 yields 1, > which confuses the driver's users. This information is clearly wrong > and not in accordance to the datasheet, but it's been observed on an > AM335x board, very reproducible. > > Fix this by looking at bit 19 in PD2 of the completed packet. This bit > will tell us if a zero-length packet was received on a queue. If it's > set, ignore the value in PD0 and report a total length of 0 instead.
Applied this one, Thanks -- ~Vinod -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html