This change has been tested to work with PL-2303HX at 115200, 500000,
1000000, 2000000, 2500000, 3000000 and 4000000 baud rates.
Signed-off-by: Lauri Hintsala <lauri.hints...@bluegiga.com>
---
CC: Johan Hovold <jhov...@gmail.com>
CC: Greg Kroah-Hartman <gre...@linuxfoundation.org>
CC: linux-usb@vger.kernel.org
drivers/usb/serial/pl2303.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index b3d5a35..51f2420 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -394,16 +394,14 @@ static void pl2303_encode_baud_rate(struct tty_struct
*tty,
if (spriv->type->max_baud_rate)
baud = min_t(speed_t, baud, spriv->type->max_baud_rate);
/*
- * Set baud rate to nearest supported value.
- *
- * NOTE: Baud rate 500k can only be set using divisors.
+ * Use direct method for supported baud rates, otherwise use divisors.
*/
baud_sup = pl2303_get_supported_baud_rate(baud);
- if (baud == 500000)
- baud = pl2303_encode_baud_rate_divisor(buf, baud);
+ if (baud == baud_sup)
+ baud = pl2303_encode_baud_rate_direct(buf, baud);
else
- baud = pl2303_encode_baud_rate_direct(buf, baud_sup);
+ baud = pl2303_encode_baud_rate_divisor(buf, baud);
/* Save resulting baud rate */
tty_encode_baud_rate(tty, baud, baud);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
