The OMAP2+ MUSB glue layer still uses a bare number for the DEVCTL.B-Device bit
in one place, while there's #define MUSB_DEVCTL_BDEVICE for that.
Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>
---
The patch is against the 'next' branch of Felipe Balbi's 'usb.git' repo.
drivers/usb/musb/omap2430.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
Index: usb/drivers/usb/musb/omap2430.c
===================================================================
--- usb.orig/drivers/usb/musb/omap2430.c
+++ usb/drivers/usb/musb/omap2430.c
@@ -162,7 +162,8 @@ static void omap2430_musb_set_vbus(struc
* Wait for the musb to set as A device to enable the
* VBUS
*/
- while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
+ while (musb_readb(musb->mregs, MUSB_DEVCTL) &
+ MUSB_DEVCTL_BDEVICE) {
mdelay(5);
cpu_relax();
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
