Kever, On Mon, Nov 10, 2014 at 5:09 AM, Kever Yang <kever.y...@rock-chips.com> wrote: > Hcd controller needs bus_suspend/resume, dwc2 controller make > root hub generate suspend/resume signal with hprt0 register > when work in host mode. > After the root hub enter suspend, we can make controller enter > low power state with PCGCTL register. > > We also update the lx_state for hsotg state. > > This patch has tested on rk3288 with suspend/resume. > > Signed-off-by: Kever Yang <kever.y...@rock-chips.com> > Acked-by: Paul Zimmerman <pa...@synopsys.com> > --- > > Changes in v3: > - remove CONFIG_PM macro for bus_suspend/resume > - add PCGCTL operation for no device connect case > > Changes in v2: > - update commit message > - make dwc2 suspend/resume sourcecode work > > drivers/usb/dwc2/hcd.c | 88 > +++++++++++++++++++++++++++++++++++++++++++------- > 1 file changed, 77 insertions(+), 11 deletions(-)
I would certainly appreciate confirmation, but my inclination is to NAK this change due to the fact that it regresses functionality. I haven't done any serious review of it, but I've been testing it and it appears to break hotplug. Said another way, I did this: 1. Without this patch, I booted with a USB stick in. It was detected. I unplugged it, waited 5 seconds, and then plugged it back in. The USB stick was redetcted. 2. With this patch, I did the same thing. The USB not redected after plugging it back in. -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
