> From: Yunzhi Li [mailto:l...@rock-chips.com]
> Sent: Friday, December 05, 2014 4:52 AM
>
> Get PHY parameters from devicetree and power off usb PHY during
> system suspend.
>
> Signed-off-by: Yunzhi Li <l...@rock-chips.com>
> ---
>
> drivers/usb/dwc2/gadget.c | 33 ++++++++++++---------------------
> drivers/usb/dwc2/platform.c | 34 ++++++++++++++++++++++++++++++++++
> 2 files changed, 46 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> index 200168e..2601c61 100644
> --- a/drivers/usb/dwc2/gadget.c
> +++ b/drivers/usb/dwc2/gadget.c
> @@ -3410,8 +3410,6 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
> {
> struct device *dev = hsotg->dev;
> struct s3c_hsotg_plat *plat = dev->platform_data;
> - struct phy *phy;
> - struct usb_phy *uphy;
> struct s3c_hsotg_ep *eps;
> int epnum;
> int ret;
> @@ -3421,30 +3419,23 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int
> irq)
> hsotg->phyif = GUSBCFG_PHYIF16;
>
> /*
> - * Attempt to find a generic PHY, then look for an old style
> - * USB PHY, finally fall back to pdata
> + * If platform probe couldn't find a generic PHY or an old style
> + * USB PHY, fall back to pdata
> */
> - phy = devm_phy_get(dev, "usb2-phy");
> - if (IS_ERR(phy)) {
> - uphy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> - if (IS_ERR(uphy)) {
> - /* Fallback for pdata */
> - plat = dev_get_platdata(dev);
> - if (!plat) {
> - dev_err(dev,
> - "no platform data or transceiver defined\n");
> - return -EPROBE_DEFER;
> - }
> - hsotg->plat = plat;
> - } else
> - hsotg->uphy = uphy;
> - } else {
> - hsotg->phy = phy;
> + if (IS_ERR_OR_NULL(hsotg->phy) && IS_ERR_OR_NULL(hsotg->uphy)) {
> + plat = dev_get_platdata(dev);
> + if (!plat) {
> + dev_err(dev,
> + "no platform data or transceiver defined\n");
> + return -EPROBE_DEFER;
> + }
> + hsotg->plat = plat;
> + } else if (hsotg->phy) {
You have changed the behavior here. Previously, the driver would work
even if there were no phys or pdata defined. Now it will return
-EPROBE_DEFER instead. Are you sure that won't break any existing
platforms?
> /*
> * If using the generic PHY framework, check if the PHY bus
> * width is 8-bit and set the phyif appropriately.
> */
> - if (phy_get_bus_width(phy) == 8)
> + if (phy_get_bus_width(hsotg->phy) == 8)
> hsotg->phyif = GUSBCFG_PHYIF8;
> }
>
> diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
> index 6a795aa..739d14f 100644
> --- a/drivers/usb/dwc2/platform.c
> +++ b/drivers/usb/dwc2/platform.c
> @@ -155,6 +155,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
> struct dwc2_core_params defparams;
> struct dwc2_hsotg *hsotg;
> struct resource *res;
> + struct phy *phy;
> + struct usb_phy *uphy;
> int retval;
> int irq;
>
> @@ -212,6 +214,24 @@ static int dwc2_driver_probe(struct platform_device *dev)
>
> hsotg->dr_mode = of_usb_get_dr_mode(dev->dev.of_node);
>
> + /*
> + * Attempt to find a generic PHY, then look for an old style
> + * USB PHY
> + */
> + phy = devm_phy_get(&dev->dev, "usb2-phy");
> + if (IS_ERR(phy)) {
> + hsotg->phy = NULL;
> + uphy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2);
> + if (IS_ERR(uphy))
> + hsotg->uphy = NULL;
> + else
> + hsotg->uphy = uphy;
> + } else {
> + hsotg->phy = phy;
> + phy_power_on(hsotg->phy);
> + phy_init(hsotg->phy);
> + }
> +
> spin_lock_init(&hsotg->lock);
> mutex_init(&hsotg->init_mutex);
> retval = dwc2_gadget_init(hsotg, irq);
> @@ -233,6 +253,14 @@ static int __maybe_unused dwc2_suspend(struct device
> *dev)
>
> if (dwc2_is_device_mode(dwc2))
> ret = s3c_hsotg_suspend(dwc2);
> + else {
Kernel style says that both branches of the if() should have braces
here.
> + if (dwc2->lx_state == DWC2_L0)
> + return 0;
> + if (dwc2->phy) {
> + phy_exit(dwc2->phy);
> + phy_power_off(dwc2->phy);
> + }
Minor nit: no need to test dwc2->phy for NULL here, the phy functions
handle a NULL pointer just fine.
> + }
> return ret;
> }
>
> @@ -243,6 +271,12 @@ static int __maybe_unused dwc2_resume(struct device *dev)
>
> if (dwc2_is_device_mode(dwc2))
> ret = s3c_hsotg_resume(dwc2);
> + else {
Braces.
> + if (dwc2->phy) {
> + phy_power_on(dwc2->phy);
> + phy_init(dwc2->phy);
> + }
> + }
> return ret;
> }
>
--
Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
